Compression behavior and energy absorption of 3D printed continuous fiber reinforced composite honeycomb structures with shape memory effects

被引:145
作者
Zeng, Chengjun [1 ]
Liu, Liwu [1 ]
Bian, Wenfeng [2 ]
Leng, Jinsong [3 ]
Liu, Yanju [1 ]
机构
[1] Harbin Inst Technol HIT, Dept Astronaut Sci & Mech, POB 301,92 West Dazhi St, Harbin 150001, Peoples R China
[2] Harbin Inst Technol HIT, Dept Civil Engn, Weihai 264209, Peoples R China
[3] Harbin Inst Technol HIT, Ctr Composite Mat & Struct, POB 3011,2 YiKuang St, Harbin 150080, Peoples R China
基金
中国国家自然科学基金;
关键词
3D printing; Continuous fiber; Honeycomb; Energy absorption; Shape memory;
D O I
10.1016/j.addma.2021.101842
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Three-dimensional (3D) printing is a potential rapid prototyping process that may replace traditional manufacturing processes to fabricate lightweight cellular structures with superior energy absorption performance. In the present work, continuous fiber reinforced composite honeycomb structures (CFRCHSs) with excellent shape memory properties were manufactured through a fused filament fabrication (FFF) technology, and their out-of-plane/in-plane compression behaviors and energy absorption characteristics were experimentally investigated. The results reveal that the failure process of the 3D printed CFRCHSs under in-plane loading is that the honeycomb cells collapse layer by layer along the loading direction , accompanied by the formation of a localized band. The crashworthiness analysis indicates that the 3D printed CFRCHSs outperform several competitive cellular topologies in the compression strength and specific energy absorption. A simplified analytical model for the in-plane compression strength of CFRCHSs was derived, and good agreement between measurements and predictions was observed. Additionally, the shape recovery tests demonstrate that the 3D printed CFRCHSs possess the potential as key elements of lightweight intelligent systems and adjustable energy absorbing devices.
引用
收藏
页数:15
相关论文
共 49 条
[1]   Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM [J].
Al-Saedi, Dheyaa S. J. ;
Masood, S. H. ;
Faizan-Ur-Rab, Muhammad ;
Alomarah, Amer ;
Ponnusamy, P. .
MATERIALS & DESIGN, 2018, 144 :32-44
[2]   Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins [J].
Azzouz, Lyes ;
Chen, Yong ;
Zarrelli, Mauro ;
Pearce, Joshua M. ;
Mitchell, Leslie ;
Ren, Guogang ;
Grasso, Marzio .
COMPOSITE STRUCTURES, 2019, 213 :220-230
[3]   Deformation of honeycomb cellular structures manufactured with Laser Engineered Net Shaping (LENS) technology under quasi-static loading: Experimental testing and simulation [J].
Baranowski, Pawel ;
Platek, Pawel ;
Antolak-Dudka, Anna ;
Sarzynski, Marcin ;
Kucewicz, Michal ;
Durejko, Tomasz ;
Malachowski, Jerzy ;
Janiszewski, Jacek ;
Czujko, Tomasz .
ADDITIVE MANUFACTURING, 2019, 25 (307-316) :307-316
[4]   Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling [J].
Caminero, M. A. ;
Chacon, J. M. ;
Garcia-Moreno, I. ;
Rodriguez, G. P. .
COMPOSITES PART B-ENGINEERING, 2018, 148 :93-103
[5]   Mechanical properties of an improved 3D-printed rhombic dodecahedron stainless steel lattice structure of variable cross section [J].
Cao, Xiaofei ;
Duan, Shengyu ;
Liang, Jun ;
Wen, Weibin ;
Fang, Daining .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 145 :53-63
[6]   Additive manufacturing assisted investment casting: A low-cost method to fabricate periodic metallic cellular lattices [J].
Carneiro, V. H. ;
Rawson, S. D. ;
Puga, H. ;
Meireles, J. ;
Withers, P. J. .
ADDITIVE MANUFACTURING, 2020, 33
[7]   Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties [J].
Chacon, J. M. ;
Caminero, M. A. ;
Nunez, P. J. ;
Garcia-Plaza, E. ;
Garcia-Moreno, I. ;
Reverte, J. M. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2019, 181
[8]   3D printed hierarchical honeycombs with shape integrity under large compressive deformations [J].
Chen, Yanyu ;
Li, Tiantian ;
Jia, Zian ;
Scarpa, Fabrizio ;
Yao, Chun-Wei ;
Wang, Lifeng .
MATERIALS & DESIGN, 2018, 137 :226-234
[9]   The out-of-plane compressive behavior of metallic honeycombs [J].
Côté, F ;
Deshpande, VS ;
Fleck, NA ;
Evans, AG .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 380 (1-2) :272-280
[10]   Fabrication and mechanical behaviors of carbon fiber reinforced composite foldcore based on curved-crease origami [J].
Du, Yuntong ;
Song, Changping ;
Xiong, Jian ;
Wu, Linzhi .
COMPOSITES SCIENCE AND TECHNOLOGY, 2019, 174 :94-105