Methane-free biogas for direct feeding of solid oxide fuel cells

被引:53
作者
Leone, P. [1 ]
Lanzini, A. [1 ]
Santarelli, M. [1 ]
Cali, M. [1 ]
Sagnelli, F. [2 ]
Boulanger, A. [2 ]
Scaletta, A. [2 ]
Zitella, P. [2 ]
机构
[1] Politecn Torino, Dipartimento Energet, I-10129 Turin, Italy
[2] Environm Pk SpA, BioEnergy Lab, I-10144 Turin, Italy
关键词
Biogas; Bio-hydrogen; Direct feeding; SOFC; Carbon deposition; Dark-anaerobic digestion; WASTE-WATER; BIOHYDROGEN PRODUCTION; HYDROGEN-PRODUCTION; SOFC; RECIRCULATION; TEMPERATURE; PERFORMANCE; ANODES; SLUDGE; NI;
D O I
10.1016/j.jpowsour.2009.06.108
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This paper deals with the experimental analysis of the performance and degradation issues of a Ni-based anode-supported solid oxide fuel cell fed by a methane-free biogas from dark-anaerobic digestion of wastes by pastry and fruit shops. The biogas is produced by means of an innovative process where the biomass is fermented with a pre-treated bacteria inoculum (Clostridia) able to completely inhibit the methanization step during the fermentation process and to produce a H-2/CO2 mixture instead of conventional CH4/CO2 anaerobic digested gas (bio-methane). The proposed biogas production route leads to a biogas composition which avoids the need of introducing a reformer agent into or before the SOFC anode in order to reformate it. In order to analyse the complete behaviour of a SOFC with the bio-hydrogen fuel, an experimental session with several H-2/CO2 synthetic mixtures was performed on an anode-supported solid oxide fuel cell with a Ni-based anode. It was found that side reactions occur with such mixtures in the typical thermodynamic conditions of SOFCs (650-800 degrees C), which have an effect especially at high currents, due to the shift to a mixture consisting of hydrogen, carbon monoxide, carbon dioxide and water. However, cells operated with acceptable performance and carbon deposits (typical of a traditional hydrocarbon-containing biogas) were avoided after 50 h of cell operation even at 650 degrees C. Experiments were also performed with traditional bio-methane from anaerobic digestion with 60/40 vol% of composition. It was found that the cell performance dropped after few hours of operation due to the formation of carbon deposits. A short-term test with the real as-produced biogas was also successfully performed. The cell showed an acceptable power output (at 800 degrees C, 0.35 W cm(-2) with biogas, versus 0.55 W cm(-2) with H-2) although a huge quantity of sulphur was present in the feeding fuel (hydrogen sulphide at 103 ppm and mercaptans up to 10 ppm). Therefore, it was demonstrated the interest relying on a sustainable biomass processing which produces a biogas which can be directly fed to SOFC using traditional anode materials and avoiding the reformer component since the methane-free mixture is already safe for carbon deposition. (C) 2009 Elsevier B. V. All rights reserved.
引用
收藏
页码:239 / 248
页数:10
相关论文
共 29 条
[1]  
ARAVIND PV, 2007, THESIS DELFT U
[2]   The impact of wood-derived gasification gases on Ni-CGO anodes in intermediate temperature solid oxide fuel cells [J].
Baron, S ;
Brandon, N ;
Atkinson, A ;
Steele, B ;
Rudkin, R .
JOURNAL OF POWER SOURCES, 2004, 126 (1-2) :58-66
[3]  
DEKKER N, 2006, 7 EUR SOFC FOR JUL 3
[4]  
Fang HHP, 2002, APPL MICROBIOL BIOT, V58, P112
[5]   Influence of the anodic recirculation transient behaviour on the SOFC hybrid system performance [J].
Ferrari, ML ;
Traverso, A ;
Magistri, L ;
Massardo, AF .
JOURNAL OF POWER SOURCES, 2005, 149 :22-32
[6]  
FRANK N, 2006, 7 EUR SOFC FOR LUC J
[7]   Desulfurization processes for fuel cells systems [J].
Hernandeza, S. ;
Solarino, L. ;
Orsello, G. ;
Russo, N. ;
Fino, D. ;
Saracco, G. ;
Specchia, V. .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (12) :3209-3214
[8]   High temperature electrolyte supported Ni-GDC/YSZ/LSM SOFC operation on two-stage Viking gasifier product gas [J].
Hofmann, Ph. ;
Schweiger, A. ;
Fryda, L. ;
Panopoulos, K. D. ;
Hohenwarter, U. ;
Bentzen, J. D. ;
Ouweltjes, J. P. ;
Ahrenfeldt, J. ;
Henriksen, U. ;
Kakaras, E. .
JOURNAL OF POWER SOURCES, 2007, 173 (01) :357-366
[9]  
ISRAELSON G, 2008, P ASME FUEL CELL 200
[10]  
ISRAELSON G, 2004, J MAT ENG PERFORM, V13