Design and fabrication of an electrostatically suspended microgyroscope using UV-LIGA technology

A micromachined electrostatically suspended gyroscope, with a wheel-like rotor housed by top stator and bottom stator, using UV-LIGA microfabrication technology, was presented. The designed structure and basic operating principle of the gyroscope are described. The key steps in the fabrication process, such as wet etching of Pyrex glass pits for soldering, and integration of thick nickel structures by removal of SU-8 mold, were considered in detail and well solved. Cr/Pt/photoresist was used as etching mask and the etched pits, in depth of near 30 mu m, with aspect ratio (depth to undercutting) of 0.75, were obtained. With metal foundations constructed for consolidation, successful integration of the nickel structures, in thickness of 200 mu m, was achieved by successful removal of the SU-8 mold using oleum. After the two stators and the rotor were fabricated separately, they were assembled and soldering bonded to form axial and radial small gaps, hence, the initial prototype of the microgyroscope was realized. The key techniques described in this paper can be applied to fabrication of other micro devices. The metal foundation method, associated with removal of SU-8 mold by oleum, is expected to make SU-8 wider applications in making integrated microstructures with fabricated circuitry on the same chip.