Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy

被引：7

作者：

Javadi, Hamid ^{[1
]}

Jomaa, Walid ^{[1
]}

Dalgaard, Elvi ^{[2
]}

Brochu, Myriam ^{[3
]}

Bocher, Philippe ^{[1
]}

机构：

[1] Ecole Technol Super, Mech Engn Dept, 1100 Rue Notre Dame Ouest, Montreal, PQ H3C 1K3, Canada

[2] Pratt & Whitney Canada, 1000 Rue Marie Victorin, Longueuil, PQ J4G 1A1, Canada

[3] Ecole Polytech Montreal, Mech Engn Dept, 2900 Blvd Edouard Montpetit, Montreal, PQ H3T 1J4, Canada

来源：

12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) | 2018年 / 165卷

基金：

加拿大自然科学与工程研究理事会;

关键词：

TOOL LIFE; INTEGRITY; PARAMETERS; 718(TM);

D O I：

10.1051/matecconf/201816518004

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The effects of surface roughness parameters and residual stresses induced by finish turning on fatigue life and crack propagation behavior of Inconel 718 super-alloy are investigated. A criterion serving as a good indicator of surface quality is also discovered. This is carried out for some specific turning conditions in order to control surface characteristics including surface roughness and the bi-axial state of surface residual stresses and to investigate the effects of these characteristics on fatigue behavior. Rotating bending fatigue (RBF) tests are performed on the machined specimens at room temperature. Characterization techniques including X-ray diffraction (XRD), laser confocal microscopy, and opto-digital microscopy are used to investigate surface residual stresses in axial (ARS) and hoop (HRS) directions, surface roughness, and secondary fatigue cracks, respectively. The huge dispersion in fatigue life of smooth turned Inconel 718 with very low arithmetic average roughness (Ra) values indicates that surface finishing is not the only reliable criterion for quality control of machined components. Multivariate statistical analyses show that axial surface residual stress is the most important surface characteristic affecting the fatigue life of machined Inconel 718 for the conditions tested. Changing ARS from compressive to tensile increases the number of secondary cracks and also decreases the fatigue life of turned specimens.

引用

页数：6

共 21 条

[1] Residual stress and surface roughness when facing age hardened Inconel 718 with-CBN and ceramic cutting tools [J].

Arunachalam, RM ;

Mannan, MA ;

Spowage, AC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (09) :879-887

[2] The effect of machining on the fatigue strength of a gamma titanium aluminide intertmetallic alloy [J].

Bentley, SA ;

Mantle, AL ;

Aspinwall, DK .

INTERMETALLICS, 1999, 7 (08) :967-969

[3] Tool life and surface integrity when machining Inconel 718 with PVD- and CVD-coated tools [J].

Ezugwu, EO ;

Wang, ZM ;

Okeke, CI .

TRIBOLOGY TRANSACTIONS, 1999, 42 (02) :353-360

[4]

I.O.F. Standardization, 2002, 1302 IOF ISO

[5] Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels [J].

M'Saoubi, R ;

Outeiro, JC ;

Changeux, B ;

Lebrun, JL ;

Dias, AM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 96 (1-3) :225-233

[6]

M'Saoubi R., 2008, International Journal of Sustainable Manufacturing, V1, P203

[7] Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718 [J].

Pawade, R. S. ;

Joshi, Suhas S. ;

Brahmankar, P. K. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (01) :15-28

[8]

Petropoulos GP, 2010, SURFACE INTEGRITY IN MACHINING, P37, DOI 10.1007/978-1-84882-874-2_2

[9] Fatigue life of machined components [J].

Pramanik, A. ;

Dixit, A. R. ;

Chattopadhyaya, S. ;

Uddin, M. S. ;

Dong, Yu ;

Basak, A. K. ;

Littlefair, G. .

ADVANCES IN MANUFACTURING, 2017, 5 (01) :59-76

[10]

Rencher A. C., 2003, METHODS MULTIVARIATE, DOI DOI 10.1002/0471271357.CH8

← 1 2 3 →