Influence of Natural Filler on Mechanical Properties of Hemp/Kevlar Hybrid Green Composite and Analysis of Change in Material Behavior Using Acoustic Emission

被引：33
|
作者：
Jani, S. P. [1 ]
Kumar, A. Senthil [2 ]
Khan, M. Adam [3 ]
Sajith, S. [4 ]
Saravanan, A. [5 ]
机构：
[1] Marri Laxman Reddy Inst Technol & Management, Dept Mech Engn, Hyderabad 500043, India
[2] Sethu Inst Technol, Dept Mech Engn, Virudunagar, India
[3] Kalasalingam Univ, IRC, Krishnankoil, India
[4] Madras Inst Technol, Dept Aerosp Engn, Chennai, Tamil Nadu, India
[5] Ponjesly Coll Engn, Dept Mech Engn, Nagercoil, India
来源：
JOURNAL OF NATURAL FIBERS | 2021年 / 18卷 / 11期
关键词：
Kevlar; hemp; hybrid composite; impact; acoustic emission; BIO-FILLERS; FIBER; SHELL;
D O I：
10.1080/15440478.2019.1692321
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
This work is focused on development of hybrid composites with better toughness and hardness by including natural filler reinforcements. The changes in the behavior of the composite due to filler inclusion were evaluated through acoustic emission technique to reveal the mechanism behind the improvement in properties. The hybrid composite was developed with Hemp/Kevlar fibers in (60:40) ratio by weight as reinforcement. To improve the shock resistance, bio-fillers palm and coconut shell mixture in (1:1) ratio was added to the matrix at different wt.% of resin. Characterization of the material was carried out after the flexural, impact and hardness tests.
引用
收藏
页码：1580 / 1591
页数：12
相关论文
共 50 条
  • [1] The Consequence of SiC Filler Content on the Mechanical, Thermal, and Structural Properties of a Jute/Kevlar Reinforced Epoxy Hybrid Composite
    Behera, Alok
    Dehury, Janaki
    Rayaguru, Bishnu Prasad
    SILICON, 2023, 15 (15) : 6509 - 6519
  • [2] The Consequence of SiC Filler Content on the Mechanical, Thermal, and Structural Properties of a Jute/Kevlar Reinforced Epoxy Hybrid Composite
    Alok Behera
    Janaki Dehury
    Bishnu Prasad Rayaguru
    Silicon, 2023, 15 : 6509 - 6519
  • [3] Effect of various weaving architectures on mechanical, vibration and acoustic behavior of Kevlar-Hemp intra-ply hybrid composites
    Jeyaguru, Sangilimuthukumar
    Thiagamani, Senthil Muthu Kumar
    Siengchin, Suchart
    Subramanian, Jeyanthi
    Ebrahimnezhad-Khaljiri, Hossein
    Sanjay, Mavinkere Rangappa
    Khan, Anish
    Abuthakeer, S. Syath
    Rajesh, S.
    Alromaizan, Abeer N.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2024, 176
  • [4] Impact of BaSO4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis
    Arulmurugan, M.
    Prabu, K.
    Rajamurugan, G.
    Selvakumar, A. S.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (04)
  • [5] Enhanced mechanical and dielectric properties of natural rubber using sustainable natural hybrid filler
    Qian, Miaomiao
    Zou, Bo
    Shi, Yafei
    Zhang, Yunhe
    Wang, Xiaofeng
    Huang, Weimin
    Zhu, Yanchao
    APPLIED SURFACE SCIENCE ADVANCES, 2021, 6
  • [6] RETRACTED: Influence of Epoxy/Nanosilica on Mechanical Performance of Hemp/Kevlar Fiber Reinforced Hybrid Composite with an Ultrasonic Frequency (Retracted Article)
    Velmurugan, G.
    Natrayan, L.
    Rao, Yenda Srinivasa
    Gaur, Piyush
    Sekar, S.
    Chebolu, Rohinikumar
    Patil, Pravin P.
    Paramasivam, Prabhu
    ADSORPTION SCIENCE & TECHNOLOGY, 2022, 2022
  • [7] Investigation of Mechanical Properties of Composite Materials Using the Method of Acoustic Emission
    Urbach, A.
    Banov, M.
    Harbuz, Y.
    Turko, V.
    Feshchuk, Y.
    Khodos, N.
    MECHANIKA 2011: PROCEEDINGS OF THE 16TH INTERNATIONAL CONFERENCE, 2011, : 306 - +
  • [8] FAILURE ANALYSIS IN HYBRID COMPOSITE LAMINATES USING ACOUSTIC EMISSION AND MICROSCOPY
    Bourchak, Mostefa
    Dobah, Yousef
    Algarni, Abdullah
    Khan, Adnan
    Ahmed, Waleed K.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 1, 2016,
  • [9] MECHANICAL CHARACTERIZATION OF INTRA-PLY HYBRID COMPOSITE LAMINATES USING ACOUSTIC EMISSION
    Saleem, M.
    Gopi, E.
    Rajagurunathan, M.
    Vishnu, V.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2018, 13 (08) : 2495 - 2503
  • [10] Effect of graphite addition on mechanical behavior of Al6061/TiB2 hybrid composite using acoustic emission
    Suresh, S.
    Moorthi, N. Shenbaga Vinayaga
    Vettivel, S. C.
    Selvakumar, N.
    Jinu, G. R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 612 : 16 - 27
12345