On the evaluation of asphaltene precipitation titration data: Modeling and data assessment

被引:56
作者
Hemmati-Sarapardeh, Abdolhossein [1 ]
Ameli, Forough [2 ,3 ]
Dabir, Bahram [1 ,2 ]
Ahmadi, Mohammad [1 ]
Mohammadi, Amir H. [4 ,5 ,6 ]
机构
[1] Amirkabir Univ Technol, Dept Petr Engn, Tehran, Iran
[2] Amirkabir Univ Technol, Dept Chem Engn, Tehran, Iran
[3] Islamic Azad Univ Technol, North Tehran Branch, Tehran, Iran
[4] Univ KwaZulu Natal, Sch Engn, Thermodynam Res Unit, Howard Coll Campus,King George V Ave, ZA-4041 Durban, South Africa
[5] IRGCP, Paris, France
[6] Univ Laval, Fac Sci & Genie, Dept Genie Mines Met & Mat, Quebec City, PQ G1V 0A6, Canada
关键词
Asphaltene precipitation; Titration data; Least square support vector machine; Leverage approach; Outlier detection; SCALING EQUATION; NATURAL DEPLETION; GAS INJECTION; PRESSURE DEPLETION; CRUDE OILS; DEPOSITION; PREDICTION; TEMPERATURE; MACHINE; FLOCCULATION;
D O I
10.1016/j.fluid.2016.01.031
中图分类号
O414.1 [热力学];
学科分类号
摘要
Asphaltene precipitation causes several problems during different stages of oil production in the reservoirs. Experimental measurement of asphaltene precipitation is cumbersome, expensive and tedious. In this communication, the amount of asphaltene precipitation during titration experiments was modeled as a function of easily measureable parameters including temperature, type of solvent, and solvent to oil dilution ratio. A large data bank of asphaltene precipitation was collected from different sources, covering a wide range of thermodynamic conditions and different types of crude oils. Least square support vector machine (LSSVM) optimized with a stochastic algorithm named couples simulated annealing (CSA) was employed for the purpose of modeling. The data bank was divided into four sections based on the type of solvent and solvent to oil dilution ratio. Subsequently, for each section a model was proposed and, the results showed that all of the proposed models can predict the amount of asphaltene precipitation with enough accuracy. In general, the proposed CSA-LSSVM models can predict asphaltene precipitation with an average absolute relative error of 9.46%. The proposed models were compared to pre-existing models and both graphical and statistical analyses indicated the superiority of the proposed CSA-LSSVM models over the pre-existing ones. Finally, a mathematical model was used which not only defines the applicability domain of the proposed models, but also evaluates the quality of experimental data and detects the probable outliers. The results demonstrated that all of the proposed models are statistically valid and only 3.3% of the data may be recognized as the probable outliers. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:88 / 100
页数:13
相关论文
共 56 条