Effect of heat treatment on microstructure and mechanical property of Al-10%Mg2Si alloy

被引:48
作者
Li, Zedi [1 ]
Li, Chong [1 ]
Liu, Yongchang [1 ]
Yu, Liming [1 ]
Guo, Qianying [1 ]
Li, Huijun [2 ]
机构
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Composite & Funct Mat, Tianjin 300072, Peoples R China
[2] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2522, Australia
基金
中国国家自然科学基金;
关键词
Al-Mg2Si alloy; Microstructure; Mechanical property; Heat treatment; AL-MATRIX COMPOSITES; TENSILE PROPERTIES; PRIMARY MG2SI; AL-15-PERCENT-MG2SI COMPOSITE; COOLING RATE; HYPEREUTECTIC AL-MG2SI; NANOCRYSTALLINE MG2SI; SI;
D O I
10.1016/j.jallcom.2015.12.128
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
After solution treatment at 520 degrees C for 6 h and subsequent aging at 200 degrees C for 6 h, eutectic Mg2Si phase in Al-10%Mg2Si alloy transforms from long rod to short fiber -like and spherical morphologies, and a great number of nano-sized beta '' particles precipitate in the Al matrix. The fine eutectic Mg2Si phase combined with nano-sized precipitates gives rise to enhanced hardness and high tensile strength of Al-10%Mg2Si alloy (increasing from 186 MPa to 234.6 MPa). (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:16 / 19
页数:4
相关论文
共 23 条
[1]   Synthesis of octahedron and truncated octahedron primary Mg2Si by controlling the Sb contents [J].
Chen, Lei ;
Wang, Hui-Yuan ;
Luo, Dan ;
Zhang, Hua-Yuan ;
Liu, Bo ;
Jiang, Qi-Chuan .
CRYSTENGCOMM, 2013, 15 (09) :1787-1793
[2]   Microstructures and tensile properties of hot-extruded Al matrix composites containing different amounts of Mg2Si [J].
Emamy, M. ;
Yeganeh, S. E. Vaziri ;
Razaghian, A. ;
Tavighi, K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 586 :190-196
[3]   The effect of Cu addition and solution heat treatment on the microstructure, hardness and tensile properties of Al-15%Mg2Si-0.15%Li composite [J].
Emamy, M. ;
Emami, A. R. ;
Tavighi, K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 576 :36-44
[4]   Precipitation kinetics of Al-1.12Mg2Si-0.35 Si and Al-1.07Mg2Si-0.33 Cu alloys [J].
Gaber, A. ;
Gaffar, M. A. ;
Mostafa, M. S. ;
Zeid, E. F. Abo .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 429 (1-2) :167-175
[5]   Preparation of in-situ TiB2 and Mg2Si hybrid particulates reinforced Al-matrix composites [J].
Gao, Qi ;
Wu, Shusen ;
Lu, Shulin ;
Duan, Xuecheng ;
Zhong, Zhiyuan .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 651 :521-527
[6]   Effect of Mn addition on the microstructure and tensile properties of Al-15%Mg2Si composite [J].
Ghorbani, M. R. ;
Emamy, M. ;
Khorshidi, R. ;
Rasizadehghani, J. ;
Emami, A. R. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 550 :191-198
[7]   Thermodynamic evaluation of hypereutectic Al-Si (A390) alloy with addition of Mg [J].
Hekmat-Ardakan, Alireza ;
Ajersch, Frank .
ACTA MATERIALIA, 2010, 58 (09) :3422-3428
[8]   The study of Li effect on the microstructure and tensile properties of cast Al-Mg2Si metal matrix composite [J].
Khorshidi, R. ;
Raouf, A. Honarbakhsh ;
Emamy, M. ;
Campbell, J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (37) :9026-9033
[9]   Morphological evolution and growth mechanism of primary Mg2Si phase in Al-Mg2Si alloys [J].
Li, C. ;
Wu, Y. Y. ;
Li, H. ;
Liu, X. F. .
ACTA MATERIALIA, 2011, 59 (03) :1058-1067
[10]   Refinement and modification performance of Al-P master alloy on primary Mg2Si Al-Mg-Si alloys [J].
Li, Chong ;
Liu, Xiangfa ;
Wu, Yuying .
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 465 (1-2) :145-150