Active Fault Tolerant Control System Design for Hydraulic Manipulator With Internal Leakage Faults Based on Disturbance Observer and Online Adaptive Identification

In this paper, an active fault-tolerant control (FTC) system design is proposed for an n-degree-of-freedom (n-DOF) hydraulic manipulator with internal leakage faults and mismatched/matched lumped disturbances. A pair of matched and mismatched disturbance observers (DOBs) is proposed to simultaneously estimate and compensate for the effects of matched/mismatched disturbances on the control system in healthy conditions. The fault detection is achieved when the estimated matched disturbance is larger than a threshold. After that, a novel control reconfiguration law is designed to switch from a normal controller to a fault-tolerant controller with an online identification algorithm based on an adaptive mechanism. The proposed active FTC guarantees the position tracking performance in not only single-fault but also simultaneous-faults conditions. Moreover, the problem of uniting disturbance-observer-based control for external disturbance and adaptive control for parametric uncertainty is solved in a novel approach. Simulation results are conducted in a two-degree-of-freedom hydraulic leg prototype, which verifies the effectiveness of the proposed method.