Experimental temperature distributions in a prismatic lithium-ion battery at varying conditions

被引:71
作者
Panchal, S. [1 ]
Dincer, I. [1 ]
Agelin-Chaab, M. [1 ]
Fraser, R. [2 ]
Fowler, M. [3 ]
机构
[1] Univ Ontario, Inst Technol, Fac Engn & Appl Sci, Dept Automot Mech & Mfg Engn, 2000 Simcoe St North, Oshawa, ON L1H 7K4, Canada
[2] Univ Waterloo, Mech & Mechatron Engn Dept, 200 Univ Ave West, Waterloo, ON N2L 3G1, Canada
[3] Univ Waterloo, Dept Chem Engn, 200 Univ Ave West, Waterloo, ON N2L 3G1, Canada
关键词
Lithium-ion battery; Electric vehicle; Heat generation; Temperature contour; Thermal management system; ENERGY;
D O I
10.1016/j.icheatmasstransfer.2015.12.004
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this paper, temperature contours are presented for a prismatic lithium-ion battery at 1C, 2C, 3C, and 4C discharge rates and different boundary conditions (cooling/operating/bath temperature) of 5 degrees C, 15 degrees C, 25 degrees C, and 35 degrees C. The active (water cooling) cooling system is designed and developed based on a prismatic lithium-ion battery using dual cold plates. The battery discharges at constant current rates of 20 Amp, 40 Amp, 60 Amp, and 80 Amp, and the experimental temperature contours are then plotted between the beginning and end of discharge cycle. The results show that a higher temperature distribution is observed over the entire surface of the battery for 4C at 35 degrees C and a lower temperature distribution is noted for IC at 5 degrees C. Furthermore, it is observed that increased discharge rates between 1 C and 4C and increased boundary conditions (BCs) between 5 degrees C and 35 degrees C result in increased temperature contour of the battery. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:35 / 43
页数:9
相关论文
共 28 条
  • [1] Abousleiman R., 2013, CHARGE CAPACITY VERS
  • [2] Review of design considerations and technological challenges for successful development and deployment of plug-in hybrid electric vehicles
    Amjad, Shaik
    Neelakrishnan, S.
    Rudramoorthy, R.
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2010, 14 (03) : 1104 - 1110
  • [3] [Anonymous], 2002, MODEL 2700 MULTIMETE
  • [4] Modeling and simulation of 2D lithium-ion solid state battery
    Bates, Alex
    Mukherjee, Santanu
    Schuppert, Nicholas
    Son, Byungrak
    Kim, Joo Gon
    Park, Sam
    [J]. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2015, 39 (11) : 1505 - 1518
  • [5] Canada E., 2012, NATL INVENTORY REPOR
  • [6] Carter B., 1996, EN CONV ENG C
  • [7] Dahn J., 2011, LINDENS HDB BATTERIE
  • [8] Damodaran V., 2011, THERMAL MANAGEMENT L
  • [9] Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry
    Feng, Xuning
    Fang, Mou
    He, Xiangming
    Ouyang, Minggao
    Lu, Languang
    Wang, Hao
    Zhang, Mingxuan
    [J]. JOURNAL OF POWER SOURCES, 2014, 255 : 294 - 301
  • [10] Isaacson M.J., BATT C APPL ADV, P193