Influence of iron powder particle size on the microstructure and properties of Fe3Al intermetallics prepared by mechanical alloying and spark plasma sintering

被引：32
作者：
He, Qing [1 ]
Ha, Chengchang [1 ]
Meng, He [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2006年 / 428卷 / 1-2期
关键词：
Fe3Al intermetallics; mechanical properties; mechanical alloying and milling; powder metallurgy;
D O I：
10.1016/j.msea.2006.05.024
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Fe3Al based intermetallics were prepared by mechanical alloying and spark plasma sintering (SPS), influences of iron powder particle size on the microstructure and properties of samples were investigated. The phase identification was investigated by X-ray, the surface morphology and fractography were observed by SEM. The mechanical properties such as bending strength and strain were tested. The results show that the particle size has evident effects on the sintered materials. Homogeneous and fine microstructure was obtained by super fine (2-3 mu m) iron powder. The densities of samples are nearly the theoretical value of Fe3Al The mechanical properties of sintered samples were improved. Comparing with the coarse powder, the quantity of Fe3AlC0.5 in the samples by fine powder increased, the sintered density increased 2-3%, the bending strength enhanced about twice and strain about treble. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：314 / 318
页数：5
相关论文
共 13 条
[1]   Fundamental investigations on the spark plasma sintering/synthesis process - II. Modeling of current and temperature distributions [J].
Anselmi-Tamburini, U ;
Gennari, S ;
Garay, JE ;
Munir, ZA .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 394 (1-2) :139-148
[2]   Alloy development to minimize room temperature hydrogen embrittlement in iron aluminides [J].
Balasubramaniam, R .
JOURNAL OF ALLOYS AND COMPOUNDS, 1997, 253 (1-2) :148-151
[3]   Effect of carbon and processing on structure and mechanical properities of Fe-11 wt.% Al alloy [J].
Baligidad, RG ;
Radhakrishna, A .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2) :211-217
[4]   Fundamental investigations on the spark plasma sintering/synthesis process - I. Effect of dc pulsing on reactivity [J].
Chen, W ;
Anselmi-Tamburini, U ;
Garay, JE ;
Groza, JR ;
Munir, ZA .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 394 (1-2) :132-138
[5]   The influence of Cr and Ce additions on the mechanical properties of Fe3Al based alloys [J].
Cieslar, M ;
Karlík, M ;
Benko, M ;
Cernoch, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 324 (1-2) :23-27
[6]   Processing, properties, and applications of nickel and iron aluminides [J].
Deevi, SC ;
Sikka, VK ;
Liu, CT .
PROGRESS IN MATERIALS SCIENCE, 1997, 42 (1-4) :177-192
[7]   Nickel and iron aluminides: An overview on properties, processing, and applications [J].
Deevi, SC ;
Sikka, VK .
INTERMETALLICS, 1996, 4 (05) :357-375
[8]   Microstructural characteristics and superplastic ductility in a Zn-22%Al alloy with submicrometer grain size [J].
Furukawa, M ;
Ma, Y ;
Horita, Z ;
Nemoto, M ;
Valiev, RZ ;
Langdon, TG .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2) :122-128
[9]   A REVIEW OF RECENT DEVELOPMENTS IN FE3AL-BASED ALLOYS [J].
MCKAMEY, CG ;
DEVAN, JH ;
TORTORELLI, PF ;
SIKKA, VK .
JOURNAL OF MATERIALS RESEARCH, 1991, 6 (08) :1779-1805
[10]   Microstructures and mechanical properties of bulk nanocrystalline Fe-Al-C alloys made by mechanically alloying with subsequent spark plasma sintering [J].
Minamino, Y ;
Koizumi, Y ;
Tsuji, N ;
Hirohata, N ;
Mizuuchi, K ;
Ohkanda, Y .
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2004, 5 (1-2) :133-143
12