Reliability of a high-pressure die cast Al alloy radiator

被引：7
作者：
Timelli, Giulio [1 ]
De Mori, Alessandro [1 ]
Haghayeghi, Reza [2 ]
机构：
[1] Univ Padua, Dept Management & Engn, Stradella S Nicola 3, I-36100 Vicenza, Italy
[2] Islamic Azad Univ, Dept Mat Engn, Sci & Res Branch, Tehran, Iran
来源：
ENGINEERING FAILURE ANALYSIS | 2019年 / 105卷
关键词：
Aluminium alloys; Casting defects; Failure analysis; Reliability analysis; Fractography; ALUMINUM-ALLOYS; MN;
D O I：
10.1016/j.engfailanal.2019.06.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The resistance to pressure of a diecast AlSi11Cu2(Fe) alloy radiator has been studied at various holding temperatures. A recently developed method to seal the bottom opening of the radiator element has been presented and its reliability has been even evaluated. Three failure modes are observed during burst testing in the temperature range 40-100 degrees C, i.e. oil leakage at the interface between the radiator element and the plug, rupture of an element and detachment of the plug from the bottom opening. The main failure mechanism is attributed to the fracture of the radiator element, while the detachment of the plug occurs only at higher temperature; very few leakage failures occur. In the considered experimental range, the temperature exposure affects the burst pressure of the radiator. The failure probability of radiator can be described by three-parameter Weibull distribution, which has evidenced the reliability of the described sealing system.
引用
收藏
页码：87 / 97
页数：11
相关论文
共 31 条
  • [1] [Anonymous], 2004, 100252 EN
  • [2] [Anonymous], 1926, J TEXTILE I T
  • [3] [Anonymous], 44212014 EN
  • [4] [Anonymous], 1706 EN
  • [5] Bonollo F., 2014, P WORLD FOUNDR C MAY, P19
  • [6] High-Pressure Die-Casting: Contradictions and Challenges
    Bonollo, Franco
    Gramegna, Nicola
    Timelli, Giulio
    [J]. JOM, 2015, 67 (05) : 901 - 908
  • [7] Capaccioli M.C., 2001, THESIS
  • [8] Preparation and Melting of Scrap in Aluminum Recycling: A Review
    Capuzzi, Stefano
    Timelli, Giulio
    [J]. METALS, 2018, 8 (04)
  • [9] Corder GregoryW., 2009, Nonparametric Statistics for Non-Statisticians, P99, DOI [DOI 10.1002/9781118165881, 10.1002/9781118165881]
  • [10] Effect of super vacuum assisted high pressure die casting on the repeatability of mechanical properties of Al-Si-Mg-Mn die-cast alloys
    Dong, Xixi
    Zhu, Xiangzhen
    Ji, Shouxun
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 105 - 113
1234