Foreign objects impact damage characteristics of aluminum/composite hybrid drive shaft

被引：19

作者：

Kim, HS ^{[1
]}

Kim, BC ^{[1
]}

Lim, TS ^{[1
]}

Lee, DG ^{[1
]}

机构：

[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Taejon 305701, South Korea

来源：

COMPOSITE STRUCTURES | 2004年 / 66卷 / 1-4期

关键词：

low velocity impact; co-cured; hybrid drive shaft; delamination; ultrasonic C-scan;

D O I：

10.1016/j.compstruct.2004.04.059

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this work, the low velocity impact damage characteristics of aluminum/composite hybrid drive shaft were investigated. The hybrid drive shaft was manufactured by stacking carbon epoxy composite prepregs and insulating layer for galvanic corrosion on the inner surface of an aluminum tube, and co-curing them in an autoclave under recommended cure cycle. After impacting the co-cured hybrid drive shafts using a drop-weight impact tester, the damage and delamination of the composite layers were observed with an ultrasonic C-scan, from which the damage modes of aluminum/composite hybrid shaft were found with respect to the stacking sequence of composite materials, the thickness of the aluminum tube and the impact energy. Finally, optimal stacking sequence of the composite material and optimal thickness of the aluminum tube for the drive shaft for low velocity impact were suggested. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：377 / 389

页数：13

共 11 条

[1] Manufacture of one-piece automotive drive shafts with aluminum and composite materials [J].

Cho, DH ;

Lee, DG ;

Choi, JH .

COMPOSITE STRUCTURES, 1997, 38 (1-4) :309-319

[2]

GRESZCZUK LB, 1982, DAMAGE COMPOSITE MAT, P1

[3]

LALANNE M, 1983, MECH VIBRATION ENG, P102

[4] Design and manufacture of an automotive hybrid aluminum/composite drive shaft [J].

Lee, DG ;

Kim, HS ;

Kim, JW ;

Kim, JK .

COMPOSITE STRUCTURES, 2004, 63 (01) :87-99

[5]

REIMPELL J, 1996, AUTOMOTIVE CHASSIS E

[6]

Schmelz F., 1992, Universal Joints and Driveshafts: Analysis, Design, Applications translated by, DOI DOI 10.1007/978-3-662-02746-2

[7] Delamination threshold loads for low velocity impact on composite laminates [J].

Schoeppner, GA ;

Abrate, S .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (09) :903-915

[8]

TIMOSHENKO SP, 1963, THEORY ELASTIC STABI, P500

[9]

Van Muylder J., 1981, ELECTROCHEMICAL MAT

[10] RESIDUAL STRENGTH OF A CARBON EPOXY COMPOSITE-MATERIAL SUBJECTED TO REPEATED IMPACT [J].

WYRICK, DA ;

ADAMS, DF .

JOURNAL OF COMPOSITE MATERIALS, 1988, 22 (08) :749-765

← 1 2 →