Bio-Based Nanoparticles as a Carrier of β-Carotene: Production, Characterisation and In Vitro Gastrointestinal Digestion

beta-carotene loaded bio-based nanoparticles (NPs) were produced by the solvent-displacement method using two polymers: zein and ethylcellulose. The production of NPs was optimised through an experimental design and characterised in terms of average size and polydispersity index. The processing conditions that allowed to obtain NPs (<100 nm) were used for beta-carotene encapsulation. Then beta-carotene loaded NPs were characterised in terms of zeta potential and encapsulation efficiency. Transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction analysis were performed for further morphological and chemical characterisation. In the end, a static in vitro digestion following the INFOGEST protocol was performed and the bioaccessibility of beta-carotene encapsulated in both NPs was determined. Results show that the best conditions for a size-controlled production with a narrow size distribution are lower polymer concentrations and higher antisolvent concentrations. The encapsulation of beta-carotene in ethylcellulose NPs resulted in nanoparticles with a mean average size of 60 +/- 9 nm and encapsulation efficiency of 74 +/- 2%. beta-carotene loaded zein-based NPs resulted in a mean size of 83 +/- 8 nm and encapsulation efficiency of 93 +/- 4%. Results obtained from the in vitro digestion showed that beta-carotene bioaccessibility when encapsulated in zein NPs is 37 +/- 1%, which is higher than the value of 8.3 +/- 0.1% obtained for the ethylcellulose NPs.