Strain Hardening of Carbon Steel During Wire Drawing

被引：0
|
作者：
Prisco, Umberto [1 ]
机构：
[1] Univ Napoli Federico II, Dipartimento Ingn Chim Mat & Prod Ind, Piazzale Vincenzo Tecchio 80, I-80125 Naples, Italy
来源：
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2018年 / 21卷 / 03期
关键词：
wire drawing; strain-hardening; Avitzur's limit analysis; carbon steel; FRICTION; TEMPERATURE; SIMULATION;
D O I：
10.1590/1980-5373-MR-2017-0303
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Avitzur's limit analysis for the calculation of the drawing force in a wire drawing process is used to study the real behaviour of a carbon steel in an industrial case. The linear hardening assumption, used by Avitzur only for the first step, is extended to the whole process and tested against experimental data. The result shows that the predictions resulting from this extension are in good agreement with the experimental results and are, as rule, conservative.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] CONTINUOUS DRAWING AND RAPID ANNEALING OF CARBON-POOR STEEL WIRE
    PLANKER, E
    STAHL UND EISEN, 1969, 89 (24): : 1374 - &
  • [42] THE EFFECT OF DRAWING SPEED ON THE AGEING OF HIGH-CARBON STEEL WIRE
    Suliga, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (04) : 1931 - 1935
  • [43] Strain hardening of low-carbon steel in the field of microyield
    Vakulenko, I.A.
    Razdobreev, V.G.
    Metally, 2002, (02): : 100 - 102
  • [44] THERMAL STRAIN-HARDENING OF LOW-CARBON STEEL
    VASHCHENKO, AP
    GUREVICH, YB
    KOZLOVA, AG
    ORLOV, LG
    SPASSKII, MN
    RUSSIAN METALLURGY, 1992, (04): : 125 - 129
  • [45] Strength and microstructure evolution in nickel during large strain wire drawing
    Arya, Abhinav
    Suwas, Satyam
    Gerard, Celine
    Signor, Loic
    Thilly, Ludovic
    Chokshi, Atul H.
    ACTA MATERIALIA, 2021, 221 (221)
  • [46] STEEL WIRE DRAWING, DRAWING, ROLLING AND SHAPING INDUSTRIES
    MARMIES, GD
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1976, 73 (01): : 1 - 7
  • [47] CHANGE IN MECHANICAL-PROPERTIES OF CARBON WIRE DURING DRAWING
    NIKIFOROV, BA
    SAVKOV, VE
    SHCHEGOLEV, GA
    STEEL IN THE USSR, 1988, 18 (02): : 89 - 91
  • [48] EFFECTS OF STRAIN-HARDENING AND STRAIN RATE SENSITIVITY OF THE WIRE MATERIAL DURING DRAWING UNDER NON-NEWTONIAN PLASTO-HYDRODYNAMIC LUBRICATION CONDITIONS
    HASHMI, MSJ
    CRAMPTON, R
    SYMMONS, GR
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1981, 21 (01): : 71 - 86
  • [49] Microstructure and texture evolution in fully pearlitic steel during wire drawing
    GUO Ning
    LUAN BaiFeng
    WANG BingShu
    LIU Qing
    Science China(Technological Sciences), 2013, (05) : 1139 - 1146
  • [50] Dislocation density and configuration in fully pearlitic steel during wire drawing
    Guo, N.
    Liu, T.
    Luan, B.
    Wang, B.
    Liu, Q.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 249 - 254
12345