INVESTIGATION OF THE THERMAL DECOMPOSITION OF TALC

被引:60
作者
Liu, Xiaowen [1 ]
Liu, Xiaoxu [1 ]
Hu, Yuehua [1 ]
机构
[1] Cent S Univ, Sch Minerals Proc & Bioengn, Changsha 410083, Hunan, Peoples R China
关键词
Activation Energy; Coats-Redfern; Thermal Decomposition; Talc; FINE GRINDING PROCESS; OPAL-CT; KINETICS; CRISTOBALITE; NANOCOMPOSITES; BENTONITE; BEHAVIOR;
D O I
10.1346/CCMN.2014.0620206
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Different changes in the structural and thermal properties of various types of talc have been reported in the literature which have made comparison of analytical results difficult. The objective of the present study was to obtain some fundamental insights into the effects of the thermal behavior of talc and to carry out kinetic analyses of the decomposition of talc under high temperature. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetry-differential scanning calorimetry (TG-DSC) were used to study the thermal decomposition mechanism. The Coats-Redfern decomposition model was used to determine the decomposition mechanism of talc samples. The results showed that the decomposition of talc commenced at similar to 800 degrees C, peaking at similar to 895 degrees C, with the formation of enstatite and amorphous silica. An isothermal treatment at 1000 degrees C caused the complete dehydroxylation of talc. The XRD and FTIR results indicated that the enstatite and amorphous silica phases were transformed into clinoenstatite and paracrystalline opal phases, respectively, after the decomposition stage at 1200 degrees C. Good linearity in the Coats-Redfern model was observed from room temperature to 1300 degrees C and the activation energy was calculated to be 69 kcal/mol.
引用
收藏
页码:137 / 144
页数:8
相关论文
共 44 条
[1]   A randomized controlled trial of the efficacy of cosmetic talc compared with iodopovidone for chemical pleurodesis [J].
Agarwal, Ritesh ;
Paul, Abinash S. ;
Aggarwal, Ashutosh N. ;
Gupta, Dheeraj ;
Jindal, Surinder K. .
RESPIROLOGY, 2011, 16 (07) :1064-1069
[2]   PHYSICOCHEMICAL AND THERMAL-PROPERTIES OF MECHANOCHEMICALLY ACTIVATED TALC [J].
AGLIETTI, EF ;
LOPEZ, JMP .
MATERIALS RESEARCH BULLETIN, 1992, 27 (10) :1205-1216
[3]   Cytotoxicity and apoptosis induction by nanoscale talc particles from two different geographical regions in human lung epithelial cells [J].
Akhtar, Mohd Javed ;
Ahamed, Maqusood ;
Khan, M. A. Majeed ;
Alrokayan, Salman A. ;
Ahmad, Iqbal ;
Kumar, Sudhir .
ENVIRONMENTAL TOXICOLOGY, 2014, 29 (04) :394-406
[4]  
[Anonymous], 1974, Differential Thermal Analysis: Application and Results in Mineralogy
[5]  
Avgustinik A., 1948, Ogneupory, V13, P218
[6]   Thermoplastic starch films reinforced with talc nanoparticles [J].
Castillo, Luciana ;
Lopez, Olivia ;
Lopez, Cintia ;
Zaritzky, Noemi ;
Alejandra Garcia, M. ;
Barbosa, Silvia ;
Villar, Marcelo .
CARBOHYDRATE POLYMERS, 2013, 95 (02) :664-674
[7]   Influence of grinding colour properties of on the structure and talc, bentonite and calcite white fillers [J].
Christidis, GE ;
Makri, P ;
Perdikatsis, V .
CLAY MINERALS, 2004, 39 (02) :163-175
[8]   Changes of the main physical and technological properties of talc due to mechanical strain [J].
Dellisanti, Francesco ;
Valdre, Giovanni ;
Mondonico, Mario .
APPLIED CLAY SCIENCE, 2009, 42 (3-4) :398-404
[9]   Mechanical and thermal properties of a nanopowder talc compound produced by controlled ball milling [J].
Dellisanti, Francesco ;
Minguzzi, Vanna ;
Valdre, Giovanni .
JOURNAL OF NANOPARTICLE RESEARCH, 2011, 13 (11) :5919-5926
[10]   On the high-temperature structural behaviour of talc (Mg3Si4O10(OH)2) to 1600°C: Effect of mechanical deformation and strain [J].
Dellisanti, Francesco ;
Valdre, Giovanni .
PHILOSOPHICAL MAGAZINE, 2010, 90 (17-18) :2443-2457