Solid solution strengthening behaviors in binary Mg-Y single phase alloys

被引:190
作者
Gao, L. [1 ]
Chen, R. S. [1 ]
Han, E. H. [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, Environm Corros Ctr, Shenyang 110016, Peoples R China
关键词
Magnesium alloy; Rare earth addition; Solid solution strengthening; Dynamic strain ageing; Serrated flow; MECHANICAL-PROPERTIES; MAGNESIUM ALLOYS; CREEP STRENGTH; CRYSTALS; MICROSTRUCTURE; ZN;
D O I
10.1016/j.jallcom.2008.04.049
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Solid solution effects on the mechanical behavior of binary Mg-Y single phase alloys have been investigated in a temperature range from ambient to 350 degrees C with yttrium contents between 0.20 and 1.88 at.%. At room temperature, the hardness increases with the increasing Y content as H(v0.5) (kg mm(-2)) = 31.12 + 13.23 Y (at.%). The yield strength increases linearly with c(n), where c is the solute atom concentration and n=1/2 or 2/3. However, the yield strength deviates from the c(n) power-law at temperature over 100 degrees C. This deviation observed in tensile tests over a temperature range 150-250 degrees C can be correlated with the dynamic strain ageing (DSA) effects due to the interaction between dislocations and solute Y atoms, which is evidenced by the serrated flow, as well as the local minimum and plateau in the temperature dependences of yield and ultimate strength. Other possible strengthening mechanisms have been also discussed. All rights reserved (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:234 / 240
页数:7
相关论文
共 35 条
  • [1] SUBSTITUTIONAL SOLUTION HARDENING OF MAGNESIUM SINGLE-CRYSTALS
    AKHTAR, A
    TEGHTSOO.E
    [J]. PHILOSOPHICAL MAGAZINE, 1972, 25 (04): : 897 - &
  • [2] SOLID SOLUTION STRENGTHENING OF MAGNESIUM SINGLE CRYSTALS .I. ALLOYING BEHAVIOUR IN BASAL SLIP
    AKHTAR, A
    TEGHTSOONIAN, E
    [J]. ACTA METALLURGICA, 1969, 17 (11): : 1339 - +
  • [3] *ASM INT, 1990, BIN ALL PHAS DIAGR
  • [4] BUSK RS, 1950, AIME T, V188, P1460
  • [5] Cáceres CH, 2002, PHYS STATUS SOLIDI A, V194, P147, DOI 10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO
  • [6] 2-L
  • [7] Caceres CH, 2001, J Light Met, V1, P151, DOI [DOI 10.1016/S1471-5317(01)00008-6, 10.1016/S1471-5317(01)00008-6]
  • [8] SUBSTITUTIONAL SOLUTION HARDENING
    FLEISCHER, RL
    [J]. ACTA METALLURGICA, 1963, 11 (03): : 203 - &
  • [9] SOLUTION HARDENING
    FLEISCHER, RL
    [J]. ACTA METALLURGICA, 1961, 9 (11): : 996 - 1000
  • [10] Friedrich H. E, 2006, MG TECHNOLOGY