Investigation on microstructure, mechanical properties and corrosion behavior of VPPA welded Al-Mg-Mn-Sc-Zr alloy

被引:12
作者
Tang, Zhongqin [1 ]
Jiang, Feng [1 ,2 ,3 ]
Xu, Pian [1 ]
Jiang, Jingyu [2 ]
Zeng, Junjin [2 ]
Lu, Liying [2 ]
Tong, Mengmeng [2 ]
机构
[1] Cent South Univ, Light Alloy Res Inst, Changsha 410083, Hunan, Peoples R China
[2] Cent South Univ, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China
[3] Cent South Univ, Natl Key Lab Sci & Technol Natl Def High Strength, Changsha 410083, Hunan, Peoples R China
关键词
Al-Mg-Mn-Sc-Zr alloy; VPPAW; Microstructure; Mechanical properties; Corrosion; MICROALLOYING ADDITIONS; LOCALIZED CORROSION; ALUMINUM; ARC; RECRYSTALLIZATION; PRECIPITATION; EVOLUTION; SCANDIUM;
D O I
10.1016/j.mtcomm.2020.101480
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Variable Polarity Plasma Arc Welding (VPPAW) can be used for the excellent welding of a 6 mm thick Al-Mg-Mn-Sc-Zr alloy, promising for the aerospace applications, due to its favorable welding quality, high production efficiency and small welding deformation. At present, investigations on the corrosion behavior of this type of welded joints are still insufficient. Here, the microstructure, mechanical properties and corrosion behavior of VPPAW-based Al-Mg-Mn-Sc-Zr alloy were systematically studied. The results show that the lowest value of the hardness of the welded joint occurs in the center of the weld, the fracture position of the welded joint is located in the welded region, and the bond zone (BZ) has the poorest corrosion resistance. The ultimate tensile strength (UTS) and welding coefficient of the welded joint are 327 MPa and 74.5 %, respectively. The low strength of the welded joint is mainly due to the combustion of the Mg element, the growth of grain size and the dissolution of second phase particles, resulting in the weakening effects of solid solution strengthening, precipitation strengthening, and grain boundary strengthening. The poor corrosion resistance of the BZ is attributed to the higher density of Fe-rich intermetallic particles and the weaker passivation film in this region.
引用
收藏
页数:10
相关论文
共 50 条
[21]   Cracking Behavior, Microstructure and Properties of Selective Laser Melted Al-Mn-Mg-Sc-Zr Alloy [J].
Zhai, Ziyu ;
Pan, Wei ;
Liang, Bo ;
Liu, Yantao ;
Zhang, Yongzhong .
CRYSTALS, 2022, 12 (04)
[22]   Microstructure, mechanical properties and stress corrosion cracking of Al-Zn-Mg-Zr alloy sheet with trace amount of Sc [J].
Huang, Xing ;
Pan, Qinglin ;
Li, Bo ;
Liu, Zhiming ;
Huang, Zhiqi ;
Yin, Zhimin .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 650 :805-820
[23]   Microstructure evolution and tensile deformation behavior of an ultrahigh-strength Al-Mg-Mn-Sc-Zr alloy fabricated by laser powder bed fusion [J].
Wang, Jun ;
Liu, Fencheng ;
Yu, Xiaobin ;
Liu, Fenggang ;
Jiang, Wugui ;
Wang, Zihong ;
Huang, Chunping ;
Lin, Xin .
VACUUM, 2025, 238
[24]   Effect of minor Sc on microstructure and mechanical properties of Al-Zn-Mg-Zr alloy metal-inert gas welds [J].
Huang, Xing ;
Pan, Qinglin ;
Li, Bo ;
Liu, Zhiming ;
Huang, Zhiqi ;
Yin, Zhimin .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 629 :197-207
[25]   Influence of aging temperature on corrosion behavior of Al-Zn-Mg-Sc-Zr alloy [J].
Li, Chen ;
Pan, Qinglin ;
Shi, Yunjia ;
Wang, Ying ;
Li, Bo .
MATERIALS & DESIGN, 2014, 55 :551-559
[26]   Evaluation of pitting corrosion of Al-Mg-Mn-Sc-Zr alloy in EXCO solution by EIS [J].
彭勇宜 ;
尹志民 ;
黎三华 .
TransactionsofNonferrousMetalsSocietyofChina, 2005, (06) :1226-1230
[27]   Al 3 (Sc, Zr) precipitation in deformed Al-Mg-Mn-Sc-Zr alloy: Effect of annealing temperature and dislocation density [J].
Jiang, Jingyu ;
Jiang, Feng ;
Zhang, Menghan ;
Tang, Zhongqin ;
Tong, Mengmeng .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 831
[28]   Microstructure and Corrosion Behavior of Laser-Welded Al-Mn-Zr Alloy for Heat Exchanger [J].
Lim, Jeong-Min ;
So, Yoon-Sik ;
Kim, Jung-Gu .
MATERIALS, 2023, 16 (17)
[29]   Microstructure and mechanical properties of Al–Mg-Sc-Zr welded joint [J].
S. H. Wen ;
H. J. Jiao ;
L. G. Zhou ;
Q. S. Zhang ;
S. J. Wu .
Welding in the World, 2022, 66 :1665-1673
[30]   The synergic effects of Sc and Zr on the microstructure and mechanical properties of Al-Si-Mg alloy [J].
Xu, Cong ;
Xiao, Wenlong ;
Zheng, Ruixiao ;
Hanada, Shuji ;
Yamagata, Hiroshi ;
Ma, Chaoli .
MATERIALS & DESIGN, 2015, 88 :485-492