Effect of Rack and Pinion Feed Drive Control Parameters on Machine Tool Dynamics

被引：10
作者：
Franco, Oier [1 ]
Beudaert, Xavier [2 ]
Erkorkmaz, Kaan [1 ]
机构：
[1] Univ Waterloo, Precis Controls Lab, Waterloo, ON N2L 3G1, Canada
[2] Ideko, Dynam & Control, Elgoibar 20870, Basque Country, Spain
来源：
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING | 2020年 / 4卷 / 02期
基金：
加拿大自然科学与工程研究理事会;
关键词：
machine tool dynamics; feed drives; double motor pinion and rack; CHATTER; SUPPRESSION;
D O I：
10.3390/jmmp4020033
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In large heavy-duty machine tool applications, the parametrization of the controller that is used for the positioning of the machine can affect the machine tool dynamics. The aim of this paper is to build a Multiple-Input and Multiple-Output model that couples the servo controller and machine tool dynamics to predict the frequency response function (FRF) at the cutting point. The model is experimentally implemented and validated in an electronically preloaded rack and pinion machine tool. In addition, the influence of each control parameter on the machine tool's compliance is analysed.
引用
收藏
页数：18
相关论文
共 29 条
  • [1] The effects of dynamic interaction between machine tool subsystems on cutting process stability
    Albertelli, Paolo
    Cau, Nicola
    Bianchi, Giacomo
    Monno, Michele
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 58 (9-12) : 923 - 932
  • [2] Machine tool feed drives
    Altintas, Y.
    Verl, A.
    Brecher, C.
    Uriarte, L.
    Pritschow, G.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (02) : 779 - 796
  • [3] Altintas Y., 2005, CIRP ANN-MANUF TECHN, V54, P115, DOI DOI 10.1016/S0007-8506(07)60022-5
  • [4] Influence of high-speed machine tool control parameters on the contouring accuracy. Application to linear and circular interpolation
    Bearee, R
    Barre, PJ
    Bloch, S
    [J]. JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, 2004, 40 (03) : 321 - 342
  • [5] Beudaert X, 2016, P 13 INT C HIGH SPEE, DOI 1484796/document
  • [6] Beudaert X., 2015, P 12 INT C HIGH SPEE
  • [7] de Lacalle L.N. L6pez., 2008, Machine tools for high performance machining
  • [8] Properties of electrically preloaded rack-and-pinion drives
    Engelberth, Tim
    Apprich, Stefanie
    Friedrich, Jens
    Coupek, Daniel
    Lechler, Armin
    [J]. PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2015, 9 (02): : 269 - 276
  • [9] High bandwidth control of ball screw drives
    Erkorkmaz, K.
    Kamalzadeh, A.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 393 - 398
  • [10] Control parameters auto-tuning for bi-axial servo feed system
    Feng, B.
    Zhang, D.
    Yang, J.
    Ren, C.
    [J]. VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2014, 17 : 841 - 846
123