Machinability study of manganese alloyed austempered ductile iron

被引:5
作者
Hegde, Ananda [1 ]
Sharma, Sathyashankara [1 ]
机构
[1] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Mech & Mfg Engn, Manipal 576104, Karnataka, India
关键词
Machinability; Manganese; ADI; Austenitization; Austempering; MECHANICAL-PROPERTIES; SURFACE-ROUGHNESS; TOOL WEAR;
D O I
10.1007/s40430-018-1258-6
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Austempered ductile iron (ADI) is a heat-treated ductile cast iron with ausferrite microstructure. ADI has high strength and hardness with good ductility and toughness. However, because of the high strength and hardness of ADI, there is a concern regarding its machinability. In the present study, machinability of ADI is assessed using tool life and the surface roughness. Machining tests are conducted using Taguchi experimental design. The effects of machining parameters, heat treatment parameters, on manganese alloyed ADI in the dry turning operation are studied and it was found that austempering temperature and cutting speed have the major contributions on tool life, whereas feed rate has the major contribution on surface roughness of the material within the range of values under study. Metallographic study has revealed coarser structure at higher austempering temperature of 420 degrees which resulted in better tool life. 0.64 wt% of manganese in the ADI has resulted in lower surface roughness value.
引用
收藏
页数:9
相关论文
共 21 条
[1]  
[Anonymous], 42871997 ISO
[2]  
[Anonymous], 2015, ANN BOOK ASTM STAND
[3]  
[Anonymous], 1993, 36851993E ISO
[4]   High Performance Turning of Austempered Ductile Iron (ADI) with adapted Cutting Inserts [J].
Arft, M. ;
Klocke, F. .
14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), 2013, 8 :129-134
[5]  
Astakhov VP, 2010, SURFACE INTEGRITY IN MACHINING, P1
[6]   Comparative study of the machinability of austempered and pearlitic ductile irons in drilling process [J].
Barbosa, Patricia Alves ;
Costa, Eder Silva ;
Guesser, Wilson Luiz ;
Machado, Alisson Rocha .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2015, 37 (01) :115-122
[7]   INFLUENCE OF AUSTENITISING TEMPERATURE ON MECHANICAL-PROPERTIES OF HIGH MANGANESE ALLOYED DUCTILE IRON [J].
BAYATI, H ;
ELLIOTT, R .
MATERIALS SCIENCE AND TECHNOLOGY, 1995, 11 (09) :908-913
[8]   Investigating the machinability of austempered ductile irons having different austempering temperatures and times [J].
Cakir, M. Cemal ;
Isik, Yahya .
MATERIALS & DESIGN, 2008, 29 (05) :937-942
[9]   Investigation of cutting parameters affecting on tool wear and surface roughness in dry turning of Ti-6Al-4V using CVD and PVD coated tools [J].
Celik, Yahya Hisman ;
Kilickap, Erol ;
Guney, Musa .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (06) :2085-2093
[10]  
Chawla V., 2008, J. Miner. Mater. Charact. Eng, V7, P307