Validation of methyl malondialdehyde as internal standard for malondialdehyde detection by capillary electrophoresis

The aim of this study was to validate, by capillary electrophoresis, the use of synthesized methyl malondialdehyde as the internal standard for the direct quantification of free and total (free + bound) malondialdehyde in biological samples. All analyses were performed in 20 cm x 50 gm uncoated capillaries at 20 degreesC, using 25 mmol/L borax (pH 9.3) and 5 mmol/L tetradecyltrimethylammonium bromide as running buffer. The applied voltage was -4 kV (about 8 muA), the detector being set at 260 nm for a total run time of 8 min per sample. Free malondialdehyde was evaluated after acetonitrile extraction, while the samples evaluated for total malondialdehyde were, before extraction, hydrolyzed for I h at 60degreesC in the presence of I mol/L NaOH. The detection threshold was 0.2 mumol/L in microsomes and 0.4 mumol/L in plasma. As an application of the method, three pools of rat liver microsomes were quantified before (0.35 +/- 0.1 and 1.1 +/- 0.5 nmol/mg protein, free and total malondialdehyde, respectively, mean +/- SD) and after lipoperoxidation induction using systems able to generate oxygen free radicals (18.4 +/- 3.2 and 19.7 +/- 2.0 nmol/mg protein). The results were confirmed by isotopic dilution gas chromatography-mass spectrometry, used as the reference method. The feasibility of capillary electrophoresis for malondialdehyde determination in normal and pathological human plasma was also investigated. (C) 2002 Elsevier Science (USA). All rights reserved.