Development of basalt fiber engineered cementitious composites and its mechanical properties

被引：85

作者：

Xu, Mingfeng ^{[1
]}

Song, Song ^{[1
]}

Feng, Lei ^{[1
]}

Zhou, Jian ^{[1
]}

Li, Hui ^{[1
]}

Li, Victor C. ^{[2
]}

机构：

[1] Hebei Univ Technol, Sch Civil & Transportat Engn, Tianjin 300401, Peoples R China

[2] Univ Michigan, Dept Civil & Environm Engn, Ann Arbor, MI 48109 USA

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2021年 / 266卷

关键词：

Basalt fiber; Engineered cementitious composites; Mechanical properties; Crack pattern; FLY-ASH; HIGH-STRENGTH; ECC; PERFORMANCE; PVA; BEHAVIOR; POLYETHYLENE; DURABILITY; RESISTANCE;

D O I：

10.1016/j.conbuildmat.2020.121173

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Fiber plays a key role in the mechanical properties of Engineered Cementitious Composites (ECC), a new generation of fiber-reinforced concrete with excellent ductility and exceptional crack control capability. However, ECC loses its high ductility when exposed to fire, as the synthetic fibers typically used in ECC melt resulting in a loss of crack-bridging ability in elevated temperatures. In this study, the feasibility of using basalt fiber, an inorganic fiber with high-temperature resistance, to develop ECC is investigated experimentally. The results show that basalt fiber reinforced ECC (BF-ECC) exhibits a very unique strain-hardening and multiple-cracking behavior when compared with typical ECCs. The tensile stress-strain curve of BF-ECC is relatively smooth, with average crack width below 10 um and crack spacing less than 3 mm. The unique features of BF-ECC are interpreted based on the bridging behavior of basalt fibers. This work paves the way for further developing ECC with high-temperature resistance. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页数：8

共 47 条

[11] Fracture toughness of geopolymeric concretes reinforced with basalt fibers [J].

Dias, DP ;

Thaumaturgo, C .

CEMENT & CONCRETE COMPOSITES, 2005, 27 (01) :49-54

[12] Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECC [J].

Felekoglu, Burak ;

Tosun-Felekoglu, Kamile ;

Ranade, Ravi ;

Zhang, Qian ;

Li, Victor C. .

COMPOSITES PART B-ENGINEERING, 2014, 60 :359-370

[13]

J.C. Committee, 2008, Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks

[14] Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete [J].

Jiang, Chaohua ;

Fan, Ke ;

Wu, Fei ;

Chen, Da .

MATERIALS & DESIGN, 2014, 58 :187-193

[15] Abrasion resistance and fracture energy of concretes with basalt fiber [J].

Kabay, Nihat .

CONSTRUCTION AND BUILDING MATERIALS, 2014, 50 :95-101

[16]

Lepech M.D., 2006, INT J RESTORATION BU, V12, P119, DOI DOI 10.1515/RBM-2006-6038

[17]

Li V., 2003, J ADV CONCR TECHNOL, V1, DOI DOI 10.3151/JACT.1.215

[18]

Li V.C., 1993, J STRUCTURAL MECH EA, V10, P37, DOI [DOI 10.2208/JSCEJ.1993.471_1, 10.2208/jscej.1993.471_1]

[19]

Li V.C, 2019, ENGINEERED CEMENTITI, DOI DOI 10.1007/978-3-662-58438-5

[20] Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites [J].

Li, VC ;

Mishra, DK ;

Wu, HC .

MATERIALS AND STRUCTURES, 1995, 28 (184) :586-595

← 1 2 3 4 5 →