Consolidation of B4C-VB2 eutectic ceramics by spark plasma sintering

被引：8
|
作者：
Demirskyi, Dmytro [1 ,2 ]
Sakka, Yoshio [1 ]
Vasylkiv, Oleg [1 ,2 ]
机构：
[1] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
[2] Nanyang Technol Univ, Singapore 639798, Singapore
来源：
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2015年 / 123卷 / 1443期
基金：
日本学术振兴会;
关键词：
Spark plasma sintering; Boron carbide; Eutectic; Toughness; Hardness; FRACTURE-TOUGHNESS; COMPOSITES; HARDNESS; FABRICATION; STRENGTH;
D O I：
10.2109/jcersj2.123.1051
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The in situ synthesis and consolidation of B4C-VB2 eutectic composites by spark plasma sintering (SPS) is reported. The microstructure properties were determined for composites with the B4C-VB2 eutectic composition as functions of the VB2 content and the VB2-VB2 interlamellar spacing. A change of VB2 concentration from 45 to 48 mol.% resulted in the formation of the rodlike eutectic microstructure. Indentation fracture toughness values higher than 4 MPa.m(1/2) were identified for eutectic composites with interlamellar spacings between 0.9 and 1.2 mu m. The composites obtained by SPS with a composition of 45 mol.% VB2 exhibited a lower Vickers hardness (23-24 GPa) and higher indentation fracture toughness (up to 4.5 MPa.m(1/2)) than the eutectic composites with 48 mol.% of VB2. (C) 2015 The Ceramic Society of Japan. All rights reserved.
引用
收藏
页码：1051 / 1054
页数：4
相关论文
共 50 条
  • [21] Effect of ball milling on reactive spark plasma sintering of B4C-TiB2 composites
    Nikzad, L.
    Licheri, R.
    Ebadzadeh, T.
    Orru, R.
    Cao, G.
    CERAMICS INTERNATIONAL, 2012, 38 (08) : 6469 - 6480
  • [22] Synthesis of B6O powder and spark plasma sintering of B6O and B6O-B4C ceramics
    Solodkyi, Ievgen
    Xie, Sky Shumao
    Zhao, Ting
    Borodianska, Hanna
    Sakka, Yoshio
    Vasylkiv, Oleg
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2013, 121 (1419) : 950 - 955
  • [23] Bulk boron carbide nanostructured ceramics by reactive spark plasma sintering
    Moskovskikh, D. O.
    Paramonov, K. A.
    Nepapushev, A. A.
    Shkodich, N. F.
    Mukasyan, A. S.
    CERAMICS INTERNATIONAL, 2017, 43 (11) : 8190 - 8194
  • [24] Hard polycrystalline eutectic composite prepared by spark plasma sintering
    Bogomol, I.
    Grasso, S.
    Nishimura, T.
    Sakka, Y.
    Loboda, P.
    Vasylkiv, O.
    CERAMICS INTERNATIONAL, 2012, 38 (05) : 3947 - 3953
  • [25] The effect of sintering parameters on spark plasma sintering of B4C
    Asadikiya, Mohammad
    Zhang, Cheng
    Rudolf, Christopher
    Boesl, Benjamin
    Agarwal, Arvind
    Zhong, Yu
    CERAMICS INTERNATIONAL, 2017, 43 (14) : 11182 - 11188
  • [26] Microstructure and mechanical properties of B4C based ceramics with Fe3Al as sintering aid by spark plasma sintering
    Rehman, Sahibzada Shakir
    Ji, Wei
    Khan, Shahzad Ahmad
    Asif, Muhammad
    Fu, Zhengyi
    Wang, Weimin
    Wang, Hao
    Zhang, Jinyong
    Wang, Yucheng
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (10) : 2169 - 2175
  • [27] Synthesis of B6O powder and spark plasma sintering of B 6O and B6 O-B4C ceramics
    Vasylkiv, O. (ovasylkiv@ntu.edu.sg), 2013, Ceramic Society of Japan (121) : 950 - 955
  • [28] Fabrication, microstructure and properties of in situ synthesized B4C-NbB2 eutectic composites by spark plasma sintering
    Demirskyi, Dmytro
    Sakka, Yoshio
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2015, 123 (1433) : 33 - 37
  • [29] Sintering Behavior and Mechanical Property of B4C Ceramics Fabricated by Spark Plasma Sintering
    Kim, Kyoung Hun
    Chae, Jae Hong
    Park, Joo Seok
    Kim, Dae Keun
    Shim, Kwang Bo
    Lee, Byung Ha
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2008, 45 (01) : 60 - 64
  • [30] B4C-based hard and tough ceramics densified via spark plasma sintering using a novel Mg2Si sintering aid
    Zhang, Wenwen
    Cao, Xichao
    Zhang, Jinyong
    Zou, Ji
    Wang, Weimin
    He, Qianglong
    Ren, Lin
    Zhang, Fan
    Fu, Zhengyi
    CERAMICS INTERNATIONAL, 2023, 49 (01) : 145 - 153
12345