STUDY OF DEFORMATION MECHANISMS OF A Mg-Al-Sr ALLOY REINFORCED WITH SHORT SAFFIL® FIBRES

被引:0
|
作者
Farkas, Gergely [1 ]
Zdrazilova, Zuzana [1 ]
Mathis, Kristian [1 ]
机构
[1] Charles Univ Prague, Prague, Czech Republic
来源
METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2013年
关键词
acoustic emission; magnesium composite; plastic deformation; ACOUSTIC-EMISSION; SLIP;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In-situ acoustic emission (AE) method has been applied to study of deformation processes of an AJ51 magnesium alloy reinforced with short Saffil (R) fibres. The analysis of parameters of the AE signal revealed a significant difference in the deformation mechanisms between the matrix alloy and the composite. It is shown that the AE technique is suitable for detection of the onset of fibre cracking.
引用
收藏
页码:1449 / 1454
页数:6
相关论文
共 50 条
  • [41] An experimental investigation on the influence of hybrid turning induced deformation parameters on the properties of Mg-Zn-Sr-Dy alloy
    Parande, Gururaj
    Joju, Joseph
    Manakari, Vyasaraj
    Teo, Zhong Ming Brendan
    Gupta, Manoj
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 312
  • [42] Experimental Study of the Deformation Mechanisms in Textured Alpha-titanium Alloy Sheets
    Vidal, Vanessa
    Balcaen, Yannick
    Pettinari-Sturmel, Florence
    Douin, Joel
    Lours, Philippe
    Velay, Vincent
    Robert, Laurent
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1290 - 1293
  • [43] Study on impact toughness and fracture behaviour of an Al-Mg-Sc alloy
    Jiang, Jingyu
    Jiang, Feng
    Zhang, Menghan
    Yi, Keke
    VACUUM, 2023, 211
  • [44] Recrystallization behavior and its relationship with deformation mechanisms of a hot rolled Mg-Zn-Ca-Zr alloy
    Victoria-Hernandez, J.
    Yi, S.
    Klaumuenzer, D.
    Letzig, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761
  • [45] Deformation mechanisms of β-Li in Mg-Li dual-phase alloy and effects of surface oxide layer
    Li, Jing
    Jin, Li
    Yi, Sangbong
    Zhang, Xin
    Dong, Jie
    Luo, Ming
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 889
  • [46] Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy
    Sauvage, X.
    Enikeev, N.
    Valiev, R.
    Nasedkina, Y.
    Murashkin, M.
    ACTA MATERIALIA, 2014, 72 : 125 - 136
  • [47] Effect of plastic deformation on the formation and dissolution of transition phases in Al-12 wt.% Mg alloy
    Hamana, D
    Bouchear, M
    Derafa, A
    MATERIALS CHEMISTRY AND PHYSICS, 1998, 57 (02) : 99 - 110
  • [48] The effect of single-stage aging temperatures on the precipitation and deformation behaviors of Al-Mg-Li alloy
    Jiang, Menghui
    Zhang, Kaizhe
    Ding, Lipeng
    Wang, Chenglin
    Weng, Yaoyao
    Yan, Peijie
    Jia, Zhihong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1017
  • [49] Hot Processing Map of an Al-4.30 Mg Alloy under High One-Pass Deformation
    Zhao, Yanjun
    Ding, Haochen
    Cao, Yunfei
    Chen, Peilin
    Hu, Zhiliu
    Zhang, Jingrui
    Li, Lingxiao
    METALS, 2021, 11 (02) : 1 - 15
  • [50] Modeling strain rate sensitivity and high temperature deformation of Mg-3Al-1Zn alloy
    Chapuis, Adrien
    Liu, Qing
    JOURNAL OF MAGNESIUM AND ALLOYS, 2019, 7 (03) : 433 - 443