Cloud-to-cloud assessment of UAV and TLS 3D reconstructions of cultural heritage monuments: the case of Torre Zozzoli

被引:2
作者
Saponaro, Mirko [1 ]
Capolupo, Alessandra [1 ]
Turso, Adriano [2 ]
Tarantino, Eufemia [1 ]
机构
[1] Polytech Univ Bari, Via Orabona 4, I-70125 Bari, Italy
[2] Sipal SpA, Aeroporto Marcello Arlotta, I-74023 Grottaglie, TA, Italy
来源
EIGHTH INTERNATIONAL CONFERENCE ON REMOTE SENSING AND GEOINFORMATION OF THE ENVIRONMENT (RSCY2020) | 2020年 / 11524卷
关键词
UAV; TLS; Cloud-to-cloud; Geometric Accuracy; Cultural Heritage;
D O I
10.1117/12.2570771
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In the field of Cultural Heritage preservation and enhancement, detecting objects quickly and inexpensively, with the possibility of repeating measurements several times for monitoring any deterioration, has become an increasingly significant requirement. The existence of a conspicuous historical heritage across the Italian territory often forces local authorities to orient their survey strategies towards the research of the most economic, but still efficient, solutions. Due to these reasons, also in consideration of possible emergency situations, it is necessary to find the optimal solution to allow a timely and comprehensive detection of exhaustive 3D digital object reconstructions. An important task is therefore to test the potential accuracies of recent measurement technologies and procedures in order to produce high quality results. This study analyzes the generation of three-dimensional reconstructions of Torre Zozzoli, an historic fortified tower located 25 km from Taranto (Apulia region, Italy), through two close-range detection techniques, by comparing Terrestrial Laser Scanner (TLS) and Unmanned Aerial Vehicles (UAVs) photogrammetric imagery. To arrange and improve the methodologies of ground control point measurements, two survey techniques were implemented by means of a Total Station (TS) and a GNSS receiver in nRTK mode. Lastly, using the cloud-to-cloud (C2C) comparison tools and implementing three distributions of GCPs, UAVs and TLS points clouds were compared. Considering their accessibility in terms of costs and use, photogrammetric products from UAVs, represent a valid alternative to TLS-based 3D data in multi-temporal analysis.
引用
收藏
页数:12
相关论文
共 29 条
  • [1] New Standard for New Era: Overview of the 2015 ASPRS Positional Accuracy Standards for Digital Geospatial Data
    Abdullah, Qassim
    Maune, David
    Smith, Doug
    Heidemann, Hans Karl
    [J]. PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING, 2015, 81 (03) : 173 - 176
  • [2] Adami A., 2019, ULTRALIGHT UAV SYSTE, V42, P15
  • [3] Geomatics and augmented reality experiments for the cultural heritage
    Barrile V.
    Fotia A.
    Bilotta G.
    [J]. Applied Geomatics, 2018, 10 (4) : 569 - 578
  • [4] Testing Accuracy and Repeatability of UAV Blocks Oriented with GNSS-Supported Aerial Triangulation
    Benassi, Francesco
    Dall'Asta, Elisa
    Diotri, Fabrizio
    Forlani, Gianfranco
    di Cella, Umberto Morra
    Roncella, Riccardo
    Santise, Marina
    [J]. REMOTE SENSING, 2017, 9 (02)
  • [5] GROUND AND AERIAL DIGITAL DOCUMENTATION OF CULTURAL HERITAGE: PROVIDING TOOLS FOR 3D EXPLOITATION OF ARCHAEOLOGICAL DATA
    Cantoro, G.
    [J]. 3D VIRTUAL RECONSTRUCTION AND VISUALIZATION OF COMPLEX ARCHITECTURES, 2017, 42-2 (W3): : 141 - 145
  • [6] Caprioli M., 2007, P ISPRS WORKSH 3D AR
  • [7] Caradonna G., 2018, NEW ADV GNSS 3D SPAT, P237, DOI DOI 10.1007/978-3-319-56218-6_19
  • [8] Multi-image 3D Reconstruction: A Photogrammetric and Structure from Motion Comparative Analysis
    Caradonna, Grazia
    Tarantino, Eufemia
    Scaioni, Marco
    Figorito, Benedetto
    [J]. COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2018, PT V, 2018, 10964 : 305 - 316
  • [9] Caroti G., 2015, INT ARCH PHOTOGRAMME, V40
  • [10] Croce V., 2019, GEOMATICS CULTURAL H, P271