Removal of paper microbial contamination by atmospheric pressure DBD discharge

被引：10
|
作者：
Vrajova, J. [1 ]
Chalupova, L. [2 ]
Novotny, O. [2 ]
Cech, J. [2 ]
Krcma, F. [1 ]
Stahel, P. [2 ]
机构：
[1] Brno Univ Technol, Fac Chem, Brno 61200, Czech Republic
[2] Masaryk Univ, Fac Sci, CS-61137 Brno, Czech Republic
来源：
EUROPEAN PHYSICAL JOURNAL D | 2009年 / 54卷 / 02期
关键词：
PLASMA STERILIZATION; INACTIVATION;
D O I：
10.1140/epjd/e2009-00127-4
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this paper the removal of the microbial contamination from paper material using the plasma treatment at atmospheric pressure is investigated. The Aspergillus niger has been chosen as a bio-indicator enabling to evaluate the effect of plasma assisted microbial inactivation. Dielectric barrier discharge (DBD) operated at atmospheric pressure was used for the paper sterilization. The working gas (nitrogen, argon and helium), plasma exposition time and the plasma power density were varied in order to see the effect of the plasma treatment on the fungi removal. After the treatment, the microbial abatement was evaluated by the standard plate count method. This proved a positive effect of the DBD plasma treatment on fungi removal. Morphological and colorimetric changes of paper substrate after plasma treatment were also investigated.
引用
收藏
页码：233 / 237
页数：5
相关论文
共 50 条
  • [31] CHARACTERISTICS OF ATMOSPHERIC DIELECTRIC BARRIER DISCHARGE (DBD) TREATED WATER
    Kim, Y. H.
    Lho, T.
    Yoo, S. M.
    Lee, B. J.
    FUSION SCIENCE AND TECHNOLOGY, 2009, 55 (2T) : 196 - 199
  • [32] MICROBIAL-CONTAMINATION OF PAPER AND BOARD
    SURTEES, B
    PAPER TECHNOLOGY AND INDUSTRY, 1977, 18 (04): : 117 - 117
  • [33] Numerical modeling of a DBD in glow mode at atmospheric pressure
    Saridj, A.
    Belarbi, A. W.
    JOURNAL OF THEORETICAL AND APPLIED PHYSICS, 2019, 13 (03) : 179 - 190
  • [34] Modification of polyethylene terephthalate by atmospheric pressure dielectric barrier discharge (DBD) in view of improving the polymer wetting properties
    Kostov, K. G.
    dos Santos, A. L. R.
    Nascente, P. A. P.
    Kayama, M. E.
    Mota, R. P.
    17TH INTERNATIONAL SUMMER SCHOOL ON VACUUM, ELECTRON, AND ION TECHNOLOGIES (VEIT 2011), 2012, 356
  • [35] Comparison of surface modification of polypropylene film by filamentary DBD at atmospheric pressure and homogeneous DBD at medium pressure in air
    Fang, Z.
    Xie, X.
    Li, J.
    Yang, H.
    Qiu, Y.
    Kuffel, E.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2009, 42 (08)
  • [36] Effects of microwave absorbents in NO removal by microwave discharge of NO/Ar mixture at atmospheric pressure
    Tsuji, M
    Nakano, K
    Kumagae, J
    Tsuji, T
    Yoon, SH
    Korai, Y
    Mochida, I
    CHEMISTRY LETTERS, 2002, (03) : 338 - 339
  • [37] Removal of Cochineal Dye Color through Atmospheric Pressure Plasma Discharge Jet
    Quispe-Quispe, Arturo
    Perez-Falcon, Luis F.
    Quispe-Marcatoma, Justiniano
    Landauro, Carlos V.
    Pena Rodriguez, Victor A.
    Choi, Jae-Hong
    APPLIED SCIENCES-BASEL, 2024, 14 (02):
  • [38] SiOx Deposition on Polypropylene-Coated Paper With a Dielectric Barrier Discharge at Atmospheric Pressure
    Li, Na
    Wu, Yui Lun
    Hong, Jungmi
    Shchelkanov, Ivan A.
    Ruzic, David N.
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2015, 43 (09) : 3205 - 3210
  • [39] The influence of microbial contamination on the quality of printing paper
    Robertson, LR
    INTERACTIVE PAPER, 1997, 3227 : 248 - 253
  • [40] ACID COLORANT DYEING OF OVINE SKINS THAT ARE PRE-TREATED IN ATMOSPHERIC PRESSURE PLASMA WITH DIELECTRIC BARRIER DISCHARGE (DBD)
    Atodiresei, Gheorghe-Virgil
    Butnaru, Romen
    Doncean, Gheorghe
    Muresan, Augustin
    Bertea, Anisoara
    MANAGEMENT OF TECHNOLOGICAL CHANGES, VOL 1, 2009, : 5 - 8
12345