Indicator Analysis of Partial Discharges Measured Using Various Methods in Paper-Oil Insulation

Results of a comparative analysis of two non-dimensional coefficients, calculated based on signals emitted by partial discharges (PD) are presented in the paper. The PD were generated using setups for modeling of three basic types of PD sources, which can occur in paper-oil insulation in power transformers. The following measuring methods were considered: electrical, ultra-high frequency, acoustic emission, and optical spectrophotometry. All measurements, for each of the PD-source configuration using the various methods, were conducted simultaneously in a laboratory under same measurement conditions. Based on the gathered results it was stated that it is possible to recognize the partial discharges form based on the non-dimensional coefficients, which differ in value for all of the considered methods except for the acoustic emission. The main contribution of the research performed lies in the simplicity of the applied signal processing procedure, which can be adopted to a device or system for diagnosis of partial discharges occurring in paper-oil insulation.