Small Punch Creep Properties of Welded Joint of High Cr Ferritic Steel

被引:0
作者
Komazaki, Shin-ichi [1 ]
Kato, Taichiro [1 ]
Nakata, Toshiya [1 ]
Gatsenko, Alexander [1 ]
Kohno, Yutaka [1 ]
机构
[1] Muroran Inst Technol, Muroran, Hokkaido 0508585, Japan
来源
CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS | 2009年
关键词
SP creep test; Reduced activation ferritic steel; Welded joint; Heat affected zone; Type IV creep damage; PROCESS DETERMINING MICROSTRUCTURE; RESEARCH-AND-DEVELOPMENT; HEAT-RESISTANT STEEL; DAMAGE EVALUATION; IV FRACTURE;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The SP creep test was applied to the fusion zone, CGHAZ, FGHAZ, THAZ and base metal, which were removed from the EB welded joint of the reduced activation high Cr ferritic steel. The finite element analysis was also conducted to investigate the stress and strain distributions in the SP specimen and to correlate the results of the SP creep test and the uniaxial creep one. Experimental results revealed that the creep rupture strength of FGHAZ was lower than those of the other regimes. Additionally, the averaged equivalent Mises stress showed almost no variation at the circumference where the local necking and final fracture occurred. This equivalent stress, sigma(s). increased linearly with increasing applied SP load, P, and they were related by P = 0.46 sigma(s). By arranging the SP creep rupture data with the sigma(s), in place of the P, they are in good agreement with the uniaxial creep data.
引用
收藏
页码:1102 / 1112
页数:11
相关论文
共 23 条
[11]  
Kobayashi K, 2007, J HIGH PRESSURE I, V45, P180
[12]   Current status of fusion reactor structural materials R&D [J].
Kohyama, A .
MATERIALS TRANSACTIONS, 2005, 46 (03) :384-393
[13]   Damage evaluation of a welded joint in a long-term serviceexposed boiler by using a small punch creep test [J].
Komazaki, Shin-ichi ;
Sugimoto, Takayuki ;
Hasegawa, Yasushi ;
Kohno, Yutaka .
ISIJ INTERNATIONAL, 2007, 47 (08) :1228-1233
[14]  
KUBUSHIRO K, 2006, P 44 S STRENGTH MAT
[15]  
KUSUMOTO J, 2006, P PVP2006 2006 ASME
[16]   Creep damage in small punch creep specimens of Type 304 stainless steel [J].
Ling, Xiang ;
Zheng, Yangyan ;
You, Yingjun ;
Chen, Yuxin .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2007, 84 (05) :304-309
[17]   Evaluation of creep properties of reduced activation ferritic steels by small punch creep test [J].
Nakata, T ;
Komazaki, SI ;
Kohno, Y ;
Shiba, K ;
Kohyama, A ;
Hashida, T .
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2006, 70 (02) :130-133
[18]  
Parker J.D., 1994, ASME PVP, V279, P167
[19]   Reduced activation martensitic steels as a structural material for ITER test blanket [J].
Shiba, K ;
Enoeda, M ;
Jitsukawa, S .
JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :243-247
[20]   Type IV creep cavity accumulation and failure in steel welds [J].
Smith, DJ ;
Walker, NS ;
Kimmins, ST .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2003, 80 (09) :617-627