A general theory for the dynamics of thin viscous sheets

被引:51
|
作者
Ribe, NM [1 ]
机构
[1] Inst Phys Globe, F-75252 Paris 05, France
关键词
D O I
10.1017/S0022112001007649
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
A model for the deformation of thin viscous sheets of arbitrary shape subject to arbitrary loading is presented. The starting point is a scaling analysis based on an analytical solution of the Stokes equations for the flow in a shallow (nearly planar) sheet with constant thickness T-0 and principal curvatures k(1) and k(2), loaded by an harmonic normal stress with wavenumbers q(1) and q(2) in the directions of principal curvature. Two distinct types of deformation can occur: an 'inextensional' (bending) mode when \L-3(k(1)q(2)(2) + k(2)q(1)(2))\ much less than epsilon, and a 'membrane' (stretching) mode when \L-3(k(1)q(2)(2) + k(2)q(1)(2))\ much greater than epsilon, where L equivalent to (q(1)(2) + q(2)(2))(-1/2) and epsilon = T-0/L much less than 1. The scales revealed by the shallow-sheet solution together with asympotic expansions in powers of epsilon are used to reduce the three-dimensional equations for the flow in the sheet to a set of equivalent two-dimensional equations, valid in both the inextensional and membrane limits. for the velocity U of the sheet midsurface. Finally, kinematic evolution equations for the sheet shape (metric and curvature tensors) and thickness are derived. Illustrative numerical solutions of the equations are presented for a variety of buoyancy-driven deformations that exhibit buckling instabilities. A collapsing hemispherical dome with radius L deforms initially in a compressional membrane mode, except in bending boundary layers of width similar to (epsilonL)(1/2) near a clamped equatorial edge, and is unstable to a buckling mode which propagates into the dome from that edge. Buckling instabilities are suppressed by the extensional flow in a sagging inverted dome (pendant drop). which consequently evolves entirely in the membrane mode. A two-dimensional viscous jet falling onto a rigid plate exhibits steady periodic folding., the frequency of which varies with the jet height and extrusion rate in a way similar to that observed experimentally.
引用
收藏
页码:255 / 283
页数:29
相关论文
共 50 条
  • [1] Dynamics and shape instability of thin viscous sheets
    Filippov, Andrey
    Zheng, Zheming
    PHYSICS OF FLUIDS, 2010, 22 (02) : 1 - 10
  • [2] Thin viscous sheets with inhomogeneous viscosity
    Pfingstag, G.
    Audoly, B.
    Boudaoud, A.
    PHYSICS OF FLUIDS, 2011, 23 (06)
  • [3] Bending and stretching of thin viscous sheets
    Ribe, NM
    JOURNAL OF FLUID MECHANICS, 2001, 433 : 135 - 160
  • [4] The dynamics of thin films I: General theory
    Ida, MP
    Miksis, MJ
    SIAM JOURNAL ON APPLIED MATHEMATICS, 1998, 58 (02) : 456 - 473
  • [5] THE GENERAL THEORY OF CONTROL SHEETS
    WOLFE, B
    NUCLEAR SCIENCE AND ENGINEERING, 1958, 4 (05) : 635 - 648
  • [6] A General Theory and Analytical Solutions for Post-Buckling Behaviors of Thin Sheets
    Zhang, Jiawei
    Qiu, Xinghan
    Wang, Changguo
    Liu, Yuanpeng
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2022, 89 (06):
  • [7] DYNAMICS OF THIN LIQUID SHEETS
    LEE, CP
    WANG, TG
    DROPS AND BUBBLES: THIRD INTERNATIONAL COLLOQUIUM, 1989, 197 : 496 - 504
  • [8] AIR-BLOWN WAVES ON THIN VISCOUS SHEETS
    KING, AC
    TUCK, EO
    VANDENBROECK, JM
    PHYSICS OF FLUIDS A-FLUID DYNAMICS, 1993, 5 (04): : 973 - 978
  • [9] Thermocapillary control of rupture in thin viscous fluid sheets
    Tilley, BS
    Bowen, M
    JOURNAL OF FLUID MECHANICS, 2005, 541 : 399 - 408
  • [10] THE STRETCHING OF A THIN VISCOUS INCLUSION AND THE DRAWING OF GLASS SHEETS
    WILMOTT, P
    PHYSICS OF FLUIDS A-FLUID DYNAMICS, 1989, 1 (07): : 1098 - 1103