Catalytic Wet Oxidation of Pharmaceutical Sludge by Molecular Sieve Loaded with Cu/Ce

In the present study, the catalytic wet oxidation of pharmaceutical sludge by molecular sieve loaded with Cu/Ce as catalyst was investigated. Experiments were performed in an experimental batch reactor. Reaction parameters including catalyst dose, temperature, time, and oxygen pressure were discussed. The results showed that the catalysts prepared by co-precipitating method have good catalytic performance. Under optimum conditions, the highest volatile suspended solids (VSS) removal rate approximately 92% and chemical oxygen demand (COD) removal rate of 75% were obtained at 260 degrees C for 60 min with initial oxygen pressure 1.0 MPa and the catalyst 10 g/L. These results implied that the catalytic wet oxidation of pharmaceutical sludge by molecular sieve loaded with Cu/Ce is a promising method for the highly efficient degradation of the sludge.