Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets

被引：26
|
作者：
Teixidor, Daniel [1 ]
Ciurana, Joaquim [1 ]
Rodriguez, Ciro A. [2 ]
机构：
[1] Univ Girona, Dept Mech Engn & Civil Construct, Girona 17071, Spain
[2] Tecnol Monterrey, Ctr Innovac Diseno & Tecnol, Monterrey, Mexico
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2014年 / 71卷 / 9-12期
关键词：
Laser cutting; Fibre laser; Cardiovascular stent; Dross formation; STENT;
D O I：
10.1007/s00170-013-5599-0
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The coronary stent fabrication requires a high-precision profile cut. Fibre lasers present a solution to accomplish these requirements. This paper presents an experimental study of fibre laser cutting of 316L stainless steel thin sheets. The effect of peak pulse power, pulse frequency and cutting speed on the cutting quality for fixed gas type and gas pressure was investigated. A mathematical model based on energy balances for the dross dimensions was formulated. The dross height and the dross diameter were analysed and compared with the experimental results. This allows adjustment of the process parameters to reduce the dimensions of the dross deposited at the bottom of the workpiece during laser cutting of thin sheets.
引用
收藏
页码：1611 / 1621
页数：11
相关论文
共 50 条
  • [1] Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets
    Daniel Teixidor
    Joaquim Ciurana
    Ciro A. Rodriguez
    The International Journal of Advanced Manufacturing Technology, 2014, 71 : 1611 - 1621
  • [2] Optimization of parameters for fibre laser cutting of a 10 mm stainless steel plate
    Wandera, C.
    Kujanpaa, V.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B5) : 641 - 649
  • [3] Prediction and optimization of dross formation in laser cutting of electrical steel sheet in different environments
    Rohman, Muhamad Nur
    Ho, Jeng-Rong
    Tung, Pi-Cheng
    Lin, Chin-Te
    Lin, Chih-Kuang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 : 1977 - 1990
  • [4] Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology
    Pocorni, Jetro
    Powell, John
    Deichsel, Eckard
    Frostevarg, Jan
    Kaplan, Alexander F. H.
    OPTICS AND LASER TECHNOLOGY, 2017, 87 : 87 - 93
  • [5] Key Technological Parameters of Laser Cutting for Stainless Steel
    Chen, Yingying
    Feng, Wenjie
    Wang, Lifeng
    ADVANCED RESEARCH ON INDUSTRY, INFORMATION SYSTEM AND MATERIAL ENGINEERING, 2013, 675 : 175 - +
  • [6] Striation-free fibre laser cutting of mild steel sheets
    M. Sobih
    P.L. Crouse
    L. Li
    Applied Physics A, 2008, 90 : 171 - 174
  • [7] Investigations on dross formation susceptibility in laser fusion cutting of different stainless steel compositions with emphasis on minor element effects
    Mahrle, A.
    Wanski, T.
    Zeuner, A. T.
    Herwig, P.
    Zimmermann, M.
    JOURNAL OF LASER APPLICATIONS, 2023, 35 (03)
  • [8] Fibre laser cutting of CFRP thin sheets by multi-passes scan technique
    Leone, C.
    Genna, S.
    Tagliaferri, V.
    OPTICS AND LASERS IN ENGINEERING, 2014, 53 : 43 - 50
  • [9] Investigation of the piercing process in laser cutting of stainless steel
    Pocorni, Jetro
    Powell, John
    Frostevarg, Jan
    Kaplan, Alexander F. H.
    JOURNAL OF LASER APPLICATIONS, 2017, 29 (02)
  • [10] ANFIS estimation of optimal parameters for dross formation in plasma arc cutting process
    Denic, Nebojsa
    Cirkovic, Bogdan
    Stevanovic, Vesna
    Stevanovic, Malilsa
    Petkovic, Dalibor
    ADVANCES IN ENGINEERING SOFTWARE, 2022, 173
12345