Effect of of Pre-hydriding on the Burst Behavior of the Zirconium Cladding under Loss-of-Coolant Accident Condition

被引:8
作者
Lim, Do Wan [1 ,2 ]
Park, Dong Jun [1 ]
Park, Jeong Yong [1 ]
Jang, Ho [2 ]
Yoo, Jong Sung [3 ]
Mok, Yong Kyoon [3 ]
Suh, Jung Min [3 ]
Lee, Kang Moon [3 ]
机构
[1] LWR Fuel Technol Div, Taejon 305353, South Korea
[2] Korea Univ, Seoul, South Korea
[3] KEPCO Nucl Fuel, Taejon 305353, South Korea
来源
KOREAN JOURNAL OF METALS AND MATERIALS | 2014年 / 52卷 / 07期
关键词
alloys; deformation; mechanical properties; hardness test; zirconium fuel cladding; ZIRCALOY-4; OXIDATION; EMBRITTLEMENT; KINETICS; STEAM;
D O I
10.3365/KJMM.2014.52.7.493
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
To investigate the effects of hydrogen on the rupture behavior and mechanical property of ballooned-zirconium cladding after a loss-of-coolant accident, simulated loss-of-coolant-accident tests were carried out using pressurized-zirconium-tube samples with and without hydrogen pre-charging. A pre-hydrided cladding sample showed lower deformation in the ballooned area and lower rupture temperature than the as-received cladding sample. Ballooned cladding without hydrogen charging showed no significant difference in mechanical property, in spite of a wide range of values for circumferential strain and of a different balloon shape caused by a different heating rate. Pre-hydrided cladding, however, showed an increase in maximum load with increasing heating-rate. The strong relationship between hydrogen content and burst behavior during the loss-of-coolant accident was analyzed and the mechanism by which hydrogen hardens zirconium alloy was explained.
引用
收藏
页码:493 / 502
页数:10
相关论文
共 21 条
[1]   HYDRIDE EMBRITTLEMENT IN ZIRCALOY-4 PLATE .1. INFLUENCE OF MICROSTRUCTURE ON THE HYDRIDE EMBRITTLEMENT IN ZIRCALOY-4 AT 20-DEGREES-C AND 350-DEGREES-C [J].
BAI, JB ;
PRIOUL, C ;
FRANCOIS, D .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (06) :1185-1197
[2]  
Billone M., 2008, United States-Nuclear Regulatory Commission Report NUREG-CR-6967
[3]  
Boyack B., 2001, NUREGCR6744 LOS AL N
[4]   PRECIPITATION OF ZIRCONIUM HYDRIDE IN ZIRCONIUM AND ZIRCALOY-2 [J].
BRADBROOK, JS ;
RIDLEY, N ;
LORIMER, GW .
JOURNAL OF NUCLEAR MATERIALS, 1972, 42 (02) :142-+
[5]  
Callaghan MD., 2004, MATER FORUM, V27, P68
[6]  
CHUNG HEE M., 2005, Nuclear Engineering and Technology, V37, P327
[7]   HYDROGEN EMBRITTLEMENT OF ALPHA-ZIRCONIUM - A REVIEW [J].
COLEMAN, CE ;
HARDIE, D .
JOURNAL OF THE LESS-COMMON METALS, 1966, 11 (03) :168-+
[8]  
Cox B., 1976, Advances in corrosion science and technology, V5, P173, DOI [10.1007/978-1-4615-9062-0_3, DOI 10.1007/978-1-4615-9062-0_3]
[9]   HYDRIDE PRECIPITATES IN ZIRCONIUM ALLOYS (A REVIEW) [J].
ELLS, CE .
JOURNAL OF NUCLEAR MATERIALS, 1968, 28 (02) :129-&
[10]  
FRANKLIN DG, 1991, AM SOC TEST MATER, V1132, P3, DOI 10.1520/STP25496S