TENSILE STRENGTH OF EPOXY COMPOSITES REINFORCED WITH FIQUE FIBERS

被引:0
|
作者
Altoe, Giulio Rodrigues
Netto, Pedro Amoy [1 ]
Andrade Teles, Maria Carolina [1 ]
Xavier Borges, Luiz Gustavo [1 ]
Margem, Frederico Muylaert [1 ]
Monteiro, Sergio Neves [2 ]
机构
[1] State Univ Northern Rio de Janeiro, UENF, LAMAV, Adv Mat Lab, Ave Alberto Lamego 2000, BR-28013602 Campos Dos Goytacazes, Brazil
[2] Inst Mil Engn, Praca Gen Tiburcio,80 Urca, BR-22290270 Rio De Janeiro, RJ, Brazil
关键词
Fique Fiber; Epoxy; Tensile Test;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Environmentally friendly composites, made from natural fibers, are among the most, investigated and applied today. Natural fibers have showed advantages, such as, flexibility and toughness, if compared with synthetic fibers. This work investigates the tensile strength of epoxy composites reinforced with Fique fibers. The Fique fiber was extracted from Fique leaf presents some significant characteristic, but until now only few studies on Fique fiber were performed. Composites reinforced with up to 30% in volume of long, continuous and aligned Fique fibers were tested in an Instron machine at room temperature. The incorporation of Fique fibers increases the tensile strength of the composite. After fracture the specimens were analyzed by a SEM (scanning electron microscope).
引用
收藏
页码:391 / 396
页数:6
相关论文
共 50 条
  • [11] TENSILE BEHAVIOR OF EPOXY COMPOSITES REINFORCED WITH CONTINUOUS AND THINNER RAMIE FIBERS
    Bravo Neto, Jarbas
    Margem, Frederico Muylaert
    Monteiro, Sergio Neves
    EPD CONGRESS 2011, 2011, : 375 - 381
  • [12] TENSILE STRENGTH TESTS IN EPOXY COMPOSITES WITH HIGH INCORPORATION OF MALVA FIBERS
    de Moraes, Ygor Macabu
    Dias Ribeiro, Carolina Gomes
    Margem, Frederico Muylaert
    Monteiro, Sergio Neves
    Margem, Jean Igor
    CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2016, 2016, : 273 - 277
  • [13] Comparison of tensile strength of different carbon fabric reinforced epoxy composites
    de Paiva, Jane Maria Faulstich
    Mayer, Sérgio
    Rezende, Mirabel Cerqueira
    Materials Research, 2006, 9 (01) : 83 - 89
  • [14] Experimental determination for interlaminar tensile strength of reinforced epoxy composites with flax fibers for L-angle specimens
    Pueyo, David Jose
    Cuartero, Jesus
    Ranz, David
    Barburski, Marcin
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (26) : 7621 - 7630
  • [15] Deformation of laminated epoxy composites reinforced with high-strength fibers
    Kucher N.K.
    Zemtsov M.P.
    Zarazovskii M.N.
    Strength of Materials, 2006, 38 (1) : 27 - 38
  • [16] Numerical and experimental analysis on tensile properties of banana and glass fibers reinforced epoxy composites
    Jeyasekaran, A. Shadrach
    Kumar, K. Palani
    Rajarajan, S.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2016, 41 (11): : 1357 - 1367
  • [17] Mechanical and micromechanical tensile strength of eucalyptus bleached fibers reinforced polyoxymethylene composites
    Espinach, Francesc X.
    Granda, Luis A.
    Tarres, Quim
    Duran, Josep
    Fullana-i-Palmer, Pere
    Mutje, Pere
    COMPOSITES PART B-ENGINEERING, 2017, 116 : 333 - 339
  • [18] Numerical and experimental analysis on tensile properties of banana and glass fibers reinforced epoxy composites
    A Shadrach Jeyasekaran
    K Palani Kumar
    S Rajarajan
    Sādhanā, 2016, 41 : 1357 - 1367
  • [19] Comparison between tensile behavior of epoxy and polyester matrix composites reinforced with eucalyptus fibers
    de Oliveira, Caroline G.
    Margem, Frederico M.
    Monteiro, Sergio N.
    Duarte Lopes, Felipe Perisse
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2017, 6 (04): : 406 - 410
  • [20] Statistical analysis of notch toughness of epoxy matrix composites reinforced with fique fabric
    Oliveira, Michelle Souza
    Garcia Filho, Fabio da Costa
    da Luz, Fernanda Santos
    Pereira, Artur Camposo
    da Cruz Demosthenes, Luana Cristyne
    Cassiano Nascimento, Lucio Fabio
    Colorado Lopera, Henry Alonso
    Neves Monteiro, Sergio
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (06): : 6051 - 6057