Effect of post deposition by UV irradiation on chemical bath deposited tin sulfide thin films

Tin sulfide thin films have been grown on glass substrates by chemical bath deposition technique (CBD) at room temperature and irradiated with UV light source of wavelength 355 nm. The effect of UV illumination on the physical properties of the films was compared with that of the as-prepared film. Though the thickness of the films was unaltered after illumination, the structural, optical and electrical properties changed considerably. Structural studies showed the polycrystalline nature of the UV-illuminated sample, whereas the as-prepared film was mono crystalline. Both films were orthorhombic structure with Sn2S3 phase. The optical properties of the films were systematically studied using the optical absorbance and reflection spectra. Studies on the reflection spectra showed higher reflectance in visible and infrared region for the UV-illuminated films and lower reflectance in the infrared region for the as-prepared one. The variation of the refractive index of the samples was also analyzed. The optical absorption coefficient and the optical band gap energy of the films were evaluated. The irradiated film exhibited lower band gap of 1.74 eV than the value of as-prepared film, i.e., 1.77 eV. The measured resistivity of the tin sulfide thin films was found to be of the order of 10(8) and 10(9) Omega cm for UV-illuminated and as-prepared films, respectively. The SEM images showed the presence of worm-like nanostructures with almost similar appearance in both the films.