Fatigue life enhancement of NiTi rotary endodontic instruments by progressive reciprocating operation

被引:17
作者
Shin, C. S. [1 ]
Huang, Y. H. [1 ]
Chi, C. W. [2 ,3 ]
Lin, C. P. [2 ,3 ]
机构
[1] Natl Taiwan Univ, Dept Mech Engn, Taipei 10764, Taiwan
[2] Natl Taiwan Univ, Sch Dent, Grad Inst Clin Dent, Taipei 10764, Taiwan
[3] Natl Taiwan Univ Hosp, Taipei 10048, Taiwan
关键词
cyclic fatigue failure; fatigue life enhancement; fractographic analysis; NiTi endodontic instrument; progressive reciprocation; stationary reciprocation; ROTATING-BENDING FATIGUE; CURVED ROOT CANALS; CYCLIC FATIGUE; SHAPING ABILITY; CLINICAL-USE; PROTAPER; MOVEMENT; MOTION; RESISTANCE; FRACTURE;
D O I
10.1111/iej.12233
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Aim To evaluate the effect of reciprocating amplitude and progressive angular increment on fatigue life enhancement of NiTi rotary endodontic instruments. Methodology ProTaper F2 instruments were operated in steel artificial canals with both stationary reciprocating (SR) and progressive reciprocating (PR) motions. The SR motions involved symmetric to and fro reciprocation of +/- 180 degrees, +/- 135 degrees, +/- 90 degrees, +/- 60 degrees and +/- 45 degrees. The PR motions were +/- 45 degrees stationary motion superimposed with angular increments of 7 degrees, 11 degrees, 22.5 degrees or 31 degrees whenever an instrument completed 1, 10 or 30 reciprocating cycles (rc). The fatigue lives were compared with those under continuous rotation (CR) and a reciprocating operation with a forward 144 degrees and backward 72 degrees motion proposed by Yared (2008). The statistical significance of these operating modes on fatigue life was examined using one way ANOVA and post hoc Tukey's tests at P = 0.05. Fractographic analysis was also applied to probe the fracture mechanisms of different rotation motions. Results Fatigue life increased with decreasing reciprocating amplitude. Operating in the SR increased fatigue life by 355% over that in the CR. Except for the 22.5 degrees increment, all PR motions yielded longer fatigue lives than the SR motion. A progressive reciprocating operation with a +/- 45 degrees reciprocating amplitude and a + 7 degrees progressive angular increment every 10 reciprocating cycles (+/- 45 degrees/10rc/+ 7 degrees) increased fatigue life by 990% over that in the CR motion. In terms of life enhancement over the CR motion, the larger the curvature the less are the differences between different movements. Single crack initiation sites were found in the CR and SR motions, while three crack initiation sites were typical in the +/- 45 degrees/10rc/+ 7 degrees motion. Conclusions Fatigue life increased with decreasing reciprocating amplitude in stationary reciprocation. A progressive reciprocating operation with +/- 45 degrees/10rc/ + 7 degrees motion led to significant fatigue life enhancement and multiple fatigue crack initiation in NiTi endodontic instruments.
引用
收藏
页码:882 / 888
页数:7
相关论文
共 23 条
[1]  
Bannantine J.A., 1990, Fundamentals of Metal Fatigue Analysis
[2]   Shaping ability and cleaning effectiveness of two single-file systems in severely curved root canals of extracted teeth: Reciproc and WaveOne versus Mtwo and ProTaper [J].
Buerklein, S. ;
Hinschitza, K. ;
Dammaschke, T. ;
Schaefer, E. .
INTERNATIONAL ENDODONTIC JOURNAL, 2012, 45 (05) :449-461
[3]   Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement [J].
De-Deus, G. ;
Moreira, E. J. L. ;
Lopes, H. P. ;
Elias, C. N. .
INTERNATIONAL ENDODONTIC JOURNAL, 2010, 43 (12) :1063-1068
[4]   Assessment of apically extruded debris produced by the single-file ProTaper F2 technique under reciprocating movement [J].
De-Deus, Gustavo ;
Brandao, Maria Claudia ;
Barino, Bianca ;
Di Giorgi, Karina ;
Sergio Fidel, Rivail Antonio ;
Luna, Aderval Severino .
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY, 2010, 110 (03) :390-394
[5]   A dozen ways to prevent nickel-titanium rotary instrument fracture [J].
Di Fiore, Peter M. .
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION, 2007, 138 (02) :196-201
[6]   Investigation on the Shaping Ability of Nickel-Titanium Files When Used with a Reciprocating Motion [J].
Franco, Vittorio ;
Fabiani, Cristiano ;
Taschieri, Silvio ;
Malentacca, Augusto ;
Bortolin, Monica ;
Del Fabbro, Massimo .
JOURNAL OF ENDODONTICS, 2011, 37 (10) :1398-1401
[7]   Cyclic fatigue of Profile rotary instruments after prolonged clinical use [J].
Gambarini, G .
INTERNATIONAL ENDODONTIC JOURNAL, 2001, 34 (05) :386-389
[8]   Influence of Different Angles of Reciprocation on the Cyclic Fatigue of Nickel-Titanium Endodontic Instruments [J].
Gambarini, Gianluca ;
Rubini, Alessio Giansiracusa ;
Al Sudani, Dina ;
Gergi, Richard ;
Culla, Antonio ;
De Angelis, Francesca ;
Di Carlo, Stefano ;
Pompa, Giorgio ;
Osta, Nada ;
Testarelli, Luca .
JOURNAL OF ENDODONTICS, 2012, 38 (10) :1408-1411
[9]   Resistance to Flexural Fatigue of Reciproc R25 Files under Continuous Rotation and Reciprocating Movement [J].
Gavini, Giulio ;
Caldeira, Celso Luiz ;
Akisue, Eduardo ;
de Miranda Candeiro, George Taccio ;
Sacaguti Kawakami, Dirce Akemi .
JOURNAL OF ENDODONTICS, 2012, 38 (05) :684-687
[10]  
Kim H, 2012, SPACE, P38