Simulation and Measurement of the Current Density Distribution in Lithium-Ion Batteries by a Multi-Tab Cell Approach

被引:76
作者
Erhard, S. V. [1 ]
Osswald, P. J. [1 ]
Keil, P. [1 ]
Hoeffer, E. [1 ]
Haug, M. [1 ]
Noel, A. [1 ]
Wilhelm, J. [1 ]
Rieger, B. [1 ]
Schmidt, K. [1 ]
Kosch, S. [1 ]
Kindermann, F. M. [1 ]
Spingler, F. [1 ]
Kloust, H. [2 ]
Thoennessen, T. [2 ]
Rheinfeld, A. [1 ]
Jossen, A. [1 ]
机构
[1] Tech Univ Munich, Inst Elect Energy Storage Technol EES, Munich, Germany
[2] Custom Cells Itzehoe GmbH, Itzehoe, Germany
关键词
COMMERCIAL CYLINDRICAL CELLS; CHARGE INHOMOGENEITIES; IMPEDANCE SPECTROSCOPY; LOCAL POTENTIALS; INSERTION CELL; STATE; EQUALIZATION; ELECTRODES; DISCHARGE; IMPACT;
D O I
10.1149/2.0551701jes
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
A single-layered NMC/graphite pouch cell is investigated by means of differential local potential measurements during various operation scenarios. 44 tabs in total allow for a highly resolved potential measurement along the electrodes whilst the single layer configuration guarantees the absence of superimposed thermal gradients. By applying a multi-dimensional model framework to this cell, the current density and SOC distribution are analyzed quantitatively. The study is performed for four C-rates (0.1C, 0.5C, 1C, 2C) at three temperatures (5 degrees C, 25 degrees C, 40 degrees C).The maximum potential drop as well the corresponding SOC deviation are characterized. The results indicate that cell inhomogeneity is positively coupled to temperature, i.e. the lower the temperature, the more uniform the electrodes will be utilized. (C) The Author(s) 2017. Published by ECS. All rights reserved.
引用
收藏
页码:A6324 / A6333
页数:10
相关论文
共 33 条
[1]  
Analog Devices Inc, ULTR NOIS 24 BIT SIG
[2]   A study on the impact of lithium-ion cell relaxation on electrochemical impedance spectroscopy [J].
Barai, Anup ;
Chouchelamane, Gael H. ;
Guo, Yue ;
McGordon, Andrew ;
Jennings, Paul .
JOURNAL OF POWER SOURCES, 2015, 280 :74-80
[3]   Performance comparisons and resistance modeling for multi-segment electrode designs of power-oriented lithium-ion batteries [J].
Chen, Yi-Shiun ;
Chang, Kuo-Hsin ;
Hu, Chi-Chang ;
Cheng, Tsung-Tien .
ELECTROCHIMICA ACTA, 2010, 55 (22) :6433-6439
[4]  
Doyle C. M., 1995, PhD thesis
[5]   MODELING OF GALVANOSTATIC CHARGE AND DISCHARGE OF THE LITHIUM POLYMER INSERTION CELL [J].
DOYLE, M ;
FULLER, TF ;
NEWMAN, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1993, 140 (06) :1526-1533
[6]   Simulation and Measurement of Local Potentials of Modified Commercial Cylindrical Cells [J].
Erhard, S. V. ;
Osswald, P. J. ;
Wilhelm, J. ;
Rheinfeld, A. ;
Kosch, S. ;
Jossen, A. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2015, 162 (14) :A2707-A2719
[7]   SIMULATION AND OPTIMIZATION OF THE DUAL LITHIUM ION INSERTION CELL [J].
FULLER, TF ;
DOYLE, M ;
NEWMAN, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1994, 141 (01) :1-10
[8]   Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Lithium-Ion Batteries in Tabbed Planar Configurations [J].
Gerver, Rachel E. ;
Meyers, Jeremy P. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (07) :A835-A843
[9]   Understanding Anomalous Behavior in Coulombic Efficiency Measurements on Li-Ion Batteries [J].
Gyenes, Balazs ;
Stevens, D. A. ;
Chevrier, V. L. ;
Dahn, J. R. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2015, 162 (03) :A278-A283
[10]   Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells [J].
Hunt, Ian A. ;
Zhao, Yan ;
Patel, Yatish ;
Offer, G. J. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2016, 163 (09) :A1846-A1852