Microstructure of friction stir welding of aluminium alloy to magnesium alloy

被引:204
作者
Kostka, A. [1 ]
Coelho, R. S. [1 ]
dos Santos, J. [2 ]
Pyzalla, A. R. [3 ]
机构
[1] Max Planck Inst Eisenforsch GmbH, D-40237 Dusseldorf, Germany
[2] GKSS Forschungszentrum Geesthacht GmbH, D-21052 Geesthacht, Germany
[3] Helmholtz Zentrum Berlin Mat & Energie GmbH, D-14109 Berlin, Germany
关键词
Friction stir welding; Dissimilar joint; Microstructure; Transmission electron microscopy (TEM); AMORPHIZATION; HEAT; AL;
D O I
10.1016/j.scriptamat.2009.02.020
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure of the interface between Al alloy and Mg alloy joined by friction stir welding is characterized using electron microscopy. The intermetallic compound reaction layer has a thickness of about 1 mu m and consists mainly of fine-grained Al12Mg17 phase. Further nanosize-grained Al3Mg2 inclusions in close proximity to the Al12Mg17 layer appear in the Al alloy. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:953 / 956
页数:4
相关论文
共 26 条
[1]   Friction stir lap joining aluminum and magnesium alloys [J].
Chen, Y. C. ;
Nakata, K. .
SCRIPTA MATERIALIA, 2008, 58 (06) :433-436
[2]   Microstructure and Mechanical Properties of an AA6181-T4 Aluminium Alloy to HC340LA High Strength Steel Friction Stir Overlap Weld [J].
Coelho, Rodrigo Santiago ;
Kostka, Aleksander ;
Sheikhi, Shahram ;
dos Santos, Jorge Fernandez ;
Pyzalla, Anke Rita .
ADVANCED ENGINEERING MATERIALS, 2008, 10 (10) :961-972
[3]   Model for predicting heat generation and temperature in friction stir welding from the material properties [J].
Colegrove, P. A. ;
Shercliff, H. R. ;
Zettler, R. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (04) :284-297
[4]   Comparative study of NiW, NiMo and MoW prepared by mechanical alloying [J].
Gonzalez, G. ;
Sagarzazu, A. ;
Villalba, R. ;
Ochoa, J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 434 (SPEC. ISS.) :525-529
[5]  
Hirano S., 2003, Q J JAPAN WELD SOC, V21, P539
[6]   Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys [J].
Jata, KV ;
Semiatin, SL .
SCRIPTA MATERIALIA, 2000, 43 (08) :743-749
[7]   Feasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel [J].
Jiang, WH ;
Kovacevic, R .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (10) :1323-1331
[8]   RESEARCH ON METASTABLE STRUCTURES USING HIGH-ENERGY BALL-MILLING AT NORTH-CAROLINA-STATE-UNIVERSITY [J].
KOCH, CC .
MATERIALS TRANSACTIONS JIM, 1995, 36 (02) :85-95
[9]   Interfacial reaction in steel-aluminum joints made by friction stir welding [J].
Lee, Won-Bae ;
Schmuecker, Martin ;
Mercardo, Ulises Alfaro ;
Biallas, Gerhard ;
Jung, Seung-Boo .
SCRIPTA MATERIALIA, 2006, 55 (04) :355-358
[10]   XRD and SEM analysis near the diffusion bonding interface of Mg/Al dissimilar materials [J].
Li, Yajiang ;
Liu, Peng ;
Wang, Juan ;
Ma, Haijun .
VACUUM, 2007, 82 (01) :15-19