Mechanical Behavior of AZ31B Mg Alloy Sheets under Monotonic and Cyclic Loadings at Room and Moderately Elevated Temperatures

被引:67
作者
Ngoc-Trung Nguyen [1 ]
Seo, Oh Suk [2 ]
Lee, Chung An [2 ]
Lee, Myoung-Gyu [1 ]
Kim, Ji-hoon [3 ]
Kim, Heon Young [2 ]
机构
[1] Pohang Univ Sci & Technol, Grad Inst Ferrous Technol, Pohang 790784, Gyeongbuk, South Korea
[2] Kangwon Natl Univ, Dept Mech & Biomed Engn, Chunchon 200701, Gangwon Do, South Korea
[3] Pusan Natl Univ Jangjeon Dong, Sch Mech Engn, Pusan 609735, South Korea
基金
新加坡国家研究基金会;
关键词
yielding asymmetry; anisotropy; hardening; tension/compression loading; Young's modulus; MAGNESIUM-ALLOY; ELASTIC-MODULUS; FORMING LIMIT; SPRINGBACK CHARACTERISTICS; PLASTIC-DEFORMATION; NONBASAL SLIP; LARGE-STRAIN; FLOW-STRESS; FORMABILITY; ANISOTROPY;
D O I
10.3390/ma7021271
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Large-strain monotonic and cyclic loading tests of AZ31B magnesium alloy sheets were performed with a newly developed testing system, at different temperatures, ranging from room temperature to 250 degrees C. Behaviors showing significant twinning during initial in-plane compression and untwinning in subsequent tension at and slightly above room temperature were recorded. Strong yielding asymmetry and nonlinear hardening behavior were also revealed. Considerable Bauschinger effects, transient behavior, and variable permanent softening responses were observed near room temperature, but these were reduced and almost disappeared as the temperature increased. Different stress-strain responses were inherent to the activation of twinning at lower temperatures and non-basal slip systems at elevated temperatures. A critical temperature was identified to account for the transition between the twinning-dominant and slip-dominant deformation mechanisms. Accordingly, below the transition point, stress-strain curves of cyclic loading tests exhibited concave-up shapes for compression or compression following tension, and an unusual S-shape for tension following compression. This unusual shape disappeared when the temperature was above the transition point. Shrinkage of the elastic range and variation in Young's modulus due to plastic strain deformation during stress reversals were also observed. The texture-induced anisotropy of both the elastic and plastic behaviors was characterized experimentally.
引用
收藏
页码:1271 / 1295
页数:25
相关论文
共 65 条
[1]   Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B [J].
Agnew, SR ;
Duygulu, Ö .
INTERNATIONAL JOURNAL OF PLASTICITY, 2005, 21 (06) :1161-1193
[2]   Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y [J].
Agnew, SR ;
Yoo, MH ;
Tomé, CN .
ACTA MATERIALIA, 2001, 49 (20) :4277-4289
[3]   On the elastic modulus degradation in continuum damage mechanics [J].
Alves, M ;
Yu, JL ;
Jones, N .
COMPUTERS & STRUCTURES, 2000, 76 (06) :703-712
[4]  
[Anonymous], 1966, Report No. RD/B/N 731
[5]  
[Anonymous], ASTME800
[6]  
Balakrishnan V., 1999, MEASUREMENT IN PLANE
[7]   Continuous, large strain, tension/compression testing of sheet material [J].
Boger, RK ;
Wagoner, RH ;
Barlat, F ;
Lee, MG ;
Chung, K .
INTERNATIONAL JOURNAL OF PLASTICITY, 2005, 21 (12) :2319-2343
[8]   Internal strain and texture evolution during deformation twinning in magnesium [J].
Brown, DW ;
Agnew, SR ;
Bourke, MAM ;
Holden, TM ;
Vogel, SC ;
Tomé, CN .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 399 (1-2) :1-12
[9]   Effect of temperature, strain rate and fibre orientation on the plastic flow behaviour and formability of AZ31 magnesium alloy [J].
Bruni, C. ;
Forcellese, A. ;
Gabrielli, F. ;
Simoncini, M. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (10) :1354-1363
[10]   Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading [J].
Cáceres, CH ;
Sumitomo, T ;
Veidt, M .
ACTA MATERIALIA, 2003, 51 (20) :6211-6218