A geometrical model of the cut in five-axis milling accounting for the influence of tool orientation

被引：12

作者：

Gani, EA

Kruth, JP

Vanherck, P

Lauwers, B

机构：

[1] Katholieke Universiteit Leuven,PMA Division, Department of Mechanical Engineering

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 1997年 / 13卷 / 10期

关键词：

cut geometry; cutting force; tool orientation;

D O I：

10.1007/BF01179066

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper presents a model of the cut geometry in Jive-axis milling. This allows the establishment of a better model of cutting force to account for the influence of the tool orientation. The formulation of the width and the thickness of the cut were derived and implemented in a computer simulation. The results of simulations were verified experimentally and a good agreement was obtained. The result shows the importance of including the influence of the tool orientation in the cut cross-section calculation.

引用

页码：677 / 684

页数：8

共 13 条

[1]

Armarego EJA., 1991, ANN CIRP, V40, P25, DOI 10.1016/S0007-8506(07)61926-X

[2] Analytic mechanistic cutting force model for milling operations: A theory and methodology [J].

Bayoumi, A.E. ;

Yucesan, G. ;

Kendall, L.A. .

Journal of engineering for industry, 1994, 116 (03) :324-330

[3]

GANI EA, 1991, THESIS ENG FACULTY L

[4]

GANI EA, 1994, P PAC C MAN, P53

[5]

GANI EA, 1995, P 7 ANN C IND AER ST, pE17

[6]

*IOS, 1982, QUANTITIES CUTTING G

[7]

Kienzle O, 1952, Z VER DT ING, P299

[8]

KLINE WA, 1982, T ASME, V104, P272

[9]

KRUTH JP, 1994, ANN CIRP, V43, P443

[10]

PETERS J, 1969, ANN CIRP, V17, P225

← 1 2 →