Dynamic response of glass under low-velocity impact and high strain-rate SHPB compression loading

被引：71

作者：

Daryadel, Seyed Soheil ^{[1
]}

Mantena, P. Raju ^{[1
]}

Kim, Kiyun ^{[1
]}

Stoddard, Damian ^{[1
]}

Rajendran, A. M. ^{[1
]}

机构：

[1] Univ Mississippi, Dept Mech Engn, University, MS 38677 USA

来源：

JOURNAL OF NON-CRYSTALLINE SOLIDS | 2016年 / 432卷

关键词：

Glass; Dynamic compressive response; SHPB; Low-velocity impact; BOROSILICATE GLASS; CONFINED BOROSILICATE; DAMAGE DEVELOPMENT; FAILURE ANALYSIS; FRACTURE; STRENGTH; MODEL;

D O I：

10.1016/j.jnoncrysol.2015.10.043

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this research, the dynamic response and energy absorption characteristics of four different types of commercially available glass have been investigated experimentally. Soda lime, starphire, borosilicate, and fused silica were characterized using a Dynatup 8250 drop weight impact test system, and a Split Hopkinson Pressure Bar (SHPB). In the low-velocity punch-shear experiments, similar trend has been observed for all glass types, while starphire and borosilicate exhibited the highest total energy absorption. High strain-rate SHPB compression tests were carried out on cylindrical glass samples at two different strain-rates. Borosilicate showed higher failure strain, compressive strength, and energy absorption compared to the other glass types. The SHPB compression results indicated high dependency-of mechanical behavior of glass materials to strain-rate. The effects of surface flaws on dynamic mechanical behavior of borosilicate glass under SHPB compression loading were also investigated. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：432 / 439

页数：8

共 50 条

[21] Effect of carbon nanotubes on the in-plane dynamic behavior of a carbon/epoxy composite under high strain rate compression using SHPB
Chihi, M.
Tarfaoui, M.
Qureshi, Y.
Bouraoui, C.
Benyahia, H.
SMART MATERIALS AND STRUCTURES, 2020, 29 (08)
[22] Temperature dependence of dynamic behavior of titanium by the high strain-rate compression test
Yang, HM
Oakkey, M
Kyoungjoon, P
IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 2001, : 571 - 576
[23] Inclusion of Strain-Rate Effects in Low Velocity Impact Simulation of Laminated Composites
Abdul-Latif, Ainullotfi
Man, Mohd Hasrizam Che
Mansor, Shuhaimi
4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 1395 - 1399
[24] Dynamic response of multilayer curved aluminum honeycomb sandwich beams under low-velocity impact
Zhang, Jianxun
Yuan, Hui
Li, Jianfeng
Meng, Jixing
Huang, Wei
THIN-WALLED STRUCTURES, 2022, 177
[25] A novel hybridised composite sandwich core with Glass, Kevlar and Zylon fibres - Investigation under low-velocity impact
Zangana, Sartip
Epaarachchi, Jayantha
Ferdous, Wahid
Leng, Jinsong
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2020, 137
[26] Effect of high-temperature and strain rate on the mechanical and cracking behaviors of flawed sandstone under dynamic impact loading
Zhou, Tao
Zhang, Yangyang
Fan, Yonglin
Chen, Jiarong
Zhou, Changtai
Xie, Heping
Zhu, Jianbo
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 131
[27] Damage and failure mechanism of thin composite laminates under low-velocity impact and compression-after-impact loading conditions
Tuo, Hongliang
Lu, Zhixian
Ma, Xiaoping
Xing, Jun
Zhang, Chao
COMPOSITES PART B-ENGINEERING, 2019, 163 : 642 - 654
[28] Application of Auxetic Core to Improve Dynamic Response of Sandwich Panels Under Low-Velocity Impact
Biglari, Hasan
Teymouri, Hadi
Foroutan, Mohammad
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024, 49 (08) : 11683 - 11697
[29] Damage behaviour of Ti/GFRP laminates under Low-velocity impact loading
Nakatani H.
Kosaka T.
Osaka K.
Sawada Y.
Zairyo/Journal of the Society of Materials Science, Japan, 2010, 59 (05) : 383 - 390
[30] Processing of nanoclay filled sandwich composites and their response to low-velocity impact loading
Hosur, M. V.
Mohammed, A. A.
Zainuddin, S.
Jeelam, S.
COMPOSITE STRUCTURES, 2008, 82 (01) : 101 - 116

← 1 2 3 4 5 →