Observer Design for Axial Flow Compressor

被引:0
|
作者
Gao, Xuejun [1 ]
Huang, Tingwen [2 ]
Huang, Yu [3 ]
Liu, Jun [4 ]
Xiao, MingQing [4 ]
机构
[1] Guangdong Univ Technol, Fac Appl Math, Guangzhou 510006, Guangdong, Peoples R China
[2] Texas A&M Univ Qatar, Dept Math, Doha 23874, Qatar
[3] Zhongshan Sun Yat Sen Univ, Dept Math, Guangzhou 510275, Guangdong, Peoples R China
[4] So Illinois Univ, Dept Math, Carbondale, IL 62901 USA
来源
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME | 2014年 / 136卷 / 05期
基金
中国国家自然科学基金; 美国国家科学基金会;
关键词
EXCITATION BOUNDARY-CONDITION; DIMENSIONAL WAVE-EQUATION; CHAOTIC VIBRATIONS; MODEL; STALL; STABILIZATION; SYSTEMS;
D O I
10.1115/1.4027525
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Flow disturbance is the main cause which leads to the instability occurred in aeroengines, and it is an infinite-dimensional quantity that is impossible for a direct online measurement in reality. The unstable flow not only results in a drastic pressure reduction but also can damage to engine's components during the compressor operations. In this paper, we construct a local state observer which can deliver the full information of the flow disturbance by only sensing on an arbitrarily small area at the duct entrance in terms of averaging the flow disturbance, which provides a practical approach for real applications. The proposed observer makes possible in applications by using a feedback control to stabilize the system. The convergent gain is obtained through the approach of operator spectrum theory. Numerical simulations are provided to illustrate the effectiveness of the proposed observer by showing typical types of flow situations for aero-engine compressors.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] Effect of part sweep on axial flow compressor performance in the presence of circumferential casing grooves
    Shraman Narayan Goswami
    M Govardhan
    Sādhanā, 2019, 44
  • [42] Numerical Investigations of Stall Development in a Transonic Axial Compressor Stage
    Ozkara, Murat
    Ercetin, Umran
    Doner, Nimeti
    Sen, Fatih
    BIONANOSCIENCE, 2019, 9 (02) : 461 - 473
  • [43] Aerodynamic Analysis and Three-Dimensional Redesign of a Multi- Stage Axial Flow Compressor
    Ning, Tao
    Gu, Chun-Wei
    Ni, Wei-Dou
    Li, Xiao-Tang
    Liu, Tai-Qiu
    ENERGIES, 2016, 9 (04)
  • [44] Analytical Calculation of Stall-inception and Surge Points for an Axial-flow Compressor Rotor
    Benavides, Efren M.
    Juste, Gregorio L.
    INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, 2012, 29 (04) : 243 - 257
  • [45] The evolution of the flow topologies of 3D separations in the stator passage of an axial compressor stage
    Yu, Xianjun
    Zhang, Zhibo
    Liu, Baojie
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2013, 44 : 301 - 311
  • [46] Numerical investigation of the effects of system volume and average mass flow on the surge characteristics of an axial compressor
    Wang, Meng
    Sun, Haiou
    Wang, Zhongyi
    Wang, Yanhua
    Magagnato, Franco
    Luan, Yigang
    AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 106
  • [47] Evolution of the flow instabilities in an axial compressor rotor with large tip clearance: An experimental and URANS study
    Wang, Hao
    Wu, Yadong
    Wang, Yangang
    Deng, Shuanghou
    AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 96
  • [48] Numerical analysis of the circumferential grooves casing treatment in a counter-rotating axial flow compressor
    Mao, Xiaochen
    Liu, Bo
    Zhao, Hang
    APPLIED THERMAL ENGINEERING, 2018, 130 : 29 - 39
  • [49] Dynamic Mode Decomposition Analysis on the Unsteady Flow Field in the Tip Region for an Axial Compressor Rotor
    Liu Zhenxiong
    Hu Bo
    PROCEEDINGS OF 2020 IEEE 2ND INTERNATIONAL CONFERENCE ON CIVIL AVIATION SAFETY AND INFORMATION TECHNOLOGY (ICCASIT), 2020, : 9 - 16
  • [50] Numerical investigation into the effects of casing aspiration on the overall performance and flow unsteadiness in a counter-rotating axial flow compressor
    Mao, Xiaochen
    Liu, Bo
    Abdul, Rehman
    Zhao, Hang
    AEROSPACE SCIENCE AND TECHNOLOGY, 2018, 78 : 671 - 681