Numerical Simulation of Nozzle Flow Field with Secondary Injection Thrust Vector Control

被引：2
|
作者：
Noaman, H. R. [1 ]
Bin, Tang Hai [1 ]
Khalil, Elsayed [2 ]
机构：
[1] Beihang Univ, Sch Astronaut, Beijing, Peoples R China
[2] Mil Tech Coll, Aerosp Dept, Cairo, Egypt
来源：
2018 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIAL AND AEROSPACE ENGINEERING (2MAE 2018) | 2018年 / 179卷
关键词：
GAS INJECTION; PERFORMANCE;
D O I：
10.1051/matecconf/201817901003
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
Numerical simulations are performed to characterize the secondary injection thrust vector control. For this objective the following measurements were taken: considering the flow to be compressible and turbulent using Realizable k-epsilon turbulence model accompanied by enhanced wall treatment, the comparison between the CFD results and the experimental results shows a very good agreement. Then a parametric study on injection mass flow rate (changing secondary stagnation pressure) with the same injection location and injection angle is done. The results stated that increasing the injectant mass flow rate lead to shock impingement from opposite wall at secondary stagnation pressure 1.4 of the primary stagnation pressure.
引用
收藏
页数：10
相关论文
共 50 条
  • [11] Numerical simulation of secondary gas injecting for thrust-vector-control
    Institute of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073, China
    Beijing Hangkong Hangtian Daxue Xuebao, 2007, 1 (42-45):
  • [12] Numerical simulation on internal flow-field in hot gas thrust vector control motor
    Wu, Xiong
    Jiao, Shao-Qiu
    Zhang, Wei-Hua
    Wang, Zhong-Wei
    Guti Huojian Jishu/Journal of Solid Rocket Technology, 2007, 30 (03): : 191 - 195
  • [13] Simulation of the flowfield in secondary injection vector control nozzle for solid rocket motor
    College of Aerospace and Material Engineering, National Univ. of Defense Technology, Changsha 410073, China
    Guofang Keji Daxue Xuebao, 2006, 2 (22-25):
  • [14] Effects of secondary injection forms on thrust vector performance of shock vector controlling nozzle
    Shi, Jing-Wei
    Wang, Zhan-Xue
    Liu, Zeng-Wen
    Zhang, Xiao-Bo
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2013, 28 (12): : 2678 - 2684
  • [15] Numerical Simulation of a Hot Gas Injection Thrust Vector Control System Performance
    Raj, Prince L.
    Rejith, P.
    Balu, R.
    INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 1745 - 1749
  • [16] Experimental and Numerical Studies of Secondary Injection in Nozzle Divergence for Thrust Augmentation
    Anugrah, G.
    Raja, P.
    Deepu, M.
    Sadanandan, R.
    JOURNAL OF APPLIED FLUID MECHANICS, 2019, 12 (05) : 1719 - 1728
  • [17] Thrust shock vector control of an axisymmetric conical supersonic nozzle via secondary transverse gas injection
    Zmijanovic, V.
    Lago, V.
    Sellam, M.
    Chpoun, A.
    SHOCK WAVES, 2014, 24 (01) : 97 - 111
  • [18] Thrust shock vector control of an axisymmetric conical supersonic nozzle via secondary transverse gas injection
    V. Zmijanovic
    V. Lago
    M. Sellam
    A. Chpoun
    Shock Waves, 2014, 24 : 97 - 111
  • [19] Numerical study on thrust vector control of double hot gas secondary lateral injection
    Wang, Ge
    Xiao, Xue-Feng
    Li, Yao
    Guti Huojian Jishu/Journal of Solid Rocket Technology, 2014, 37 (05): : 622 - 627
  • [20] Numerical simulation of plug nozzle flow field
    Guo, Zheng
    Liu, Jun
    Qu, Zhanghua
    Tuijin Jishu/Journal of Propulsion Technology, 2000, 21 (04): : 24 - 26
12345