Flow and Mass Transfer for an Unsteady Stagnation-Point Flow Over a Moving Wall Considering Blowing Effects

被引:28
作者
Fang, Tiegang [1 ]
机构
[1] N Carolina State Univ, Mech & Aerosp Engn Dept, Raleigh, NC 27695 USA
来源
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME | 2014年 / 136卷 / 07期
关键词
similarity equation; unsteady stagnation-point flow; moving wall; Navier-Stokes equations; mass transfer; blowing effect; BOUNDARY-LAYER EQUATIONS; HEAT-TRANSFER; SIMILARITY SOLUTIONS; VISCOUS-FLUID; DRIVING FORCE; Y; ZHONG; T; FANG; PLATE; IMPINGEMENT; EVAPORATION;
D O I
10.1115/1.4026665
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this paper, the flow and mass transfer of a two-dimensional unsteady stagnation-point flow over a moving wall, considering the coupled blowing effect from mass transfer, is studied. Similarity equations are derived and solved in a closed form. The flow solution is an exact solution to the two-dimensional unsteady Navier-Stokes equations. An analytical solution of the boundary layer mass transfer equation is obtained together with the momentum solution. The examples demonstrate the significant impacts of the blowing effects on the flow and mass transfer characteristics. A higher blowing parameter results in a lower wall stress and thicker boundary layers with less mass transfer flux at the wall. The higher wall moving parameters produce higher mass transfer flux and blowing velocity. The Schmidt parameters generate a local maximum for the mass transfer flux and blowing velocity under given wall moving and blowing parameters.
引用
收藏
页数:7
相关论文
共 33 条
[1]   Investigation of Two-Dimensional Unsteady Stagnation-Point Flow and Heat Transfer Impinging on an Accelerated Flat Plate [J].
Abbassi, Ali Shokrgozar ;
Rahimi, Asghar Baradaran .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2012, 134 (06)
[3]  
[Anonymous], MATH SYSTEM DOING MA
[4]  
[Anonymous], 1958, Trans. ASME J. Appl. Mech.
[5]   MASS TRANSFER FOR A WIDE RANGE OF DRIVING FORCE EVAPORATION OF PURE LIQUIDS [J].
ASANO, K ;
FUJITA, S .
CHEMICAL ENGINEERING SCIENCE, 1971, 26 (08) :1187-&
[6]   Three-dimensional stagnation point flow of a second grade fluid towards a moving plate [J].
Baris, S ;
Dokuz, MS .
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 2006, 44 (1-2) :49-58
[7]   Mass and heat transfer during water evaporation in laminar flow inside a rectangular channel - validity of heat and mass transfer analogy [J].
Boukadida, N ;
Ben Nasrallah, S .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2001, 40 (01) :67-81
[8]   NONSTEADY STAGNATION-POINT FLOWS OVER PERMEABLE SURFACES - EXPLICIT SOLUTIONS OF THE NAVIER-STOKES EQUATIONS [J].
BURDE, GI .
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1995, 117 (01) :189-191
[9]   The convective drying of liquid films on slender wires [J].
Czaputa, Klaus ;
Brenn, Guenter .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (1-3) :19-31
[10]   Effect of large injection rates on unsteady mixed convection flow at a three-dimensional stagnation point [J].
Eswara, AT ;
Nath, G .
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 1999, 34 (01) :85-103