Heat transfer and energy analysis of a solar air collector with smooth plate

被引：11

作者：

Chabane, Foued ^{[1
,2
]}

Moummi, Noureddine ^{[1
,2
]}

机构：

[1] Univ Biskra, Dept Mech, Fac Technol, Biskra 07000, Algeria

[2] Univ Biskra, Mech Lab, Fac Technol, Biskra 07000, Algeria

来源：

EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS | 2014年 / 66卷 / 01期

关键词：

THERMAL PERFORMANCE; ABSORBER PLATES; THERMOHYDRAULIC PERFORMANCE; ARTIFICIAL ROUGHNESS; TRANSFER ENHANCEMENT; CHANNEL; RIBS; TRANSVERSE; EFFICIENCY; FRICTION;

D O I：

10.1051/epjap/2014130405

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

The heat transfer and thermal performance of a single pass solar air heater a smooth plate was investigated experimentally. In the present paper, energy and heat transfer analysis of a solar air collector with smooth plate, this technique is used to determine the optimal thermal performance of flat plate solar air heater by considering the different system and operating parameters to obtain maximum thermal performance. Thermal performance is obtained for different mass flow rate varying in the array 0.0108-0.0202 kg/s with five values, solar intensity; tilt angle and ambient temperature. We discuss the thermal behavior of this type of collector with new design and with my proper construction. An experimental study was carried out on a prototype installed on the experimental tests platform within the University of Biskra in the Algeria. The effects of air mass flow rate, emissivity of channel plates and wind heat transfer coefficient on the accuracy of the criterion are also investigated.

引用

页数：10

共 45 条

[1] EFFECT OF GEOMETRICAL AND THERMOPHYSICAL CHARACTERISTICS OF BED MATERIALS ON THE ENHANCEMENT OF THERMAL PERFORMANCE OF PACKED-BED SOLAR AIR HEATERS [J].