Feasibility study for blind-bolted connections to concrete-filled circular steel tubular columns

被引:44
|
作者
Goldsworthy, H. M. [1 ]
Gardner, A. P. [1 ]
机构
[1] Univ Melbourne, Dept Civil & Environm Engn, Parkville, Vic 3010, Australia
关键词
concrete-filled steel tubes; blind bolts with extensions; moment-resisting composite connection;
D O I
10.12989/sem.2006.24.4.463
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The design of structural frameworks for buildings is constantly evolving and is dependent on regional issues such as loading and constructability. One of the most promising recent developments for low to medium rise construction in terms of efficiency of construction, robustness and aesthetic appearance utilises concrete-filled steel tubular sections as the columns in a moment-resisting frame. These are coupled to rigid or semi-rigid connections to composite steel-concrete beams. This paper includes the results of a pilot experimental programme leading towards the development of economical, reliable connections that are easily constructed for this type of frame. The connections must provide the requisite strength, stiffness and ductility to suit gravity loading conditions as well as gravity combined with the governing lateral wind or earthquake loading. The aim is to develop connections that are stiffer, less expensive and easier to construct than those in current use. A proposed fabricated T-stub connection is to be used to connect the beam flanges and the column. These T-stubs are connected to the column using "blind bolts" with extensions, allowing installation from the outside of the tube. In general, the use of the extensions results in a dramatic increase in the strength and stiffness of the T-stub to column connection in tension, since the load is shared between membrane action in the tube wall and the anchorage of the bolts through the extensions into the concrete.
引用
收藏
页码:463 / 478
页数:16
相关论文
共 50 条
  • [31] Behaviour of flush end plate connections to concrete-filled tubular columns with blind bolts
    Wang, Jingfeng
    Han, Linhai
    Uy, Brian
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON STEEL, SPACE & COMPOSITE STRUCTURES, 2007, : 625 - +
  • [32] Initial stiffness and moment capacity assessment of stainless steel composite bolted joints with concrete-filled circular tubular columns
    Wang, Jia
    Uy, Brian
    Li, Dongxu
    STEEL AND COMPOSITE STRUCTURES, 2019, 33 (05): : 681 - 697
  • [33] Composite action of hollow concrete-filled circular steel tubular stub columns
    Fu, Qiang
    Ding, Fa-xing
    Zhang, Tao
    Wang, Liping
    Fang, Chang-jing
    STEEL AND COMPOSITE STRUCTURES, 2018, 26 (06): : 693 - 703
  • [34] Structural performance of blind bolted end plate joints to concrete-filled thin-walled steel tubular columns
    Wang, Jingfeng
    Guo, Shuiping
    THIN-WALLED STRUCTURES, 2012, 60 : 54 - 68
  • [35] Fire resistance of square double-skin concrete-filled steel tubular columns and concrete-filled double steel tubular columns
    Zhu, Hongjie
    Ahmed, Mizan
    Li, Chenliu
    Kong, Xiao
    Chen, Shicai
    Yang, Qingtian
    Ghazali, Habibah
    Liang, Qing Quan
    ENGINEERING STRUCTURES, 2024, 319
  • [36] Design method for connections between concrete-filled square tubular columns and steel beams
    Lu, Xi-Lin
    Li, Xue-Ping
    Yu, Yong
    Tongji Daxue Xuebao/Journal of Tongji University, 2002, 30 (01): : 1 - 5
  • [37] An experimental behaviour of concrete-filled steel tubular columns
    Zeghiche, J
    Chaoui, K
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2005, 61 (01) : 53 - 66
  • [38] Panel Zone Shear Behavior of Through-Flange Connections for Steel Beams to Circular Concrete-Filled Steel Tubular Columns
    Ou, Yu-Chen
    Ngoc-Minh Tran
    Chen, Cheng-Cheng
    Lee, Hung-Jen
    JOURNAL OF STRUCTURAL ENGINEERING, 2015, 141 (09)
  • [39] State of the art of concrete-filled steel tubular columns
    Shams, M
    Saadeghvaziri, MA
    ACI STRUCTURAL JOURNAL, 1997, 94 (05) : 558 - 571
  • [40] A novel steel section for concrete-filled tubular columns
    Abedi, K.
    Ferdousi, A.
    Afshin, H.
    THIN-WALLED STRUCTURES, 2008, 46 (03) : 310 - 319