Grid Impedance Estimation Through Grid-Forming Power Converters

In more-electronics power systems, grid-forming power converters, which operate as ac voltage sources, regulate the grid frequency and voltages in replacement of synchronous generators. Notably, grid impedances greatly influence the small signal and voltage stability of grid-forming converters. As such, prior knowledge of grid impedances can be very helpful for controller design. However, grid impedance estimation schemes are normally designed for current-controlled grid-following converters. Moreover, they are either very complicated or only yield grid inductances in a generally intrusive way. To fill this research gap, an impedance estimation method well suited to grid-forming converters is proposed. The method consists of four operating modes, which work well in voltage and power control cases. In the voltage control case, the voltage amplitude perturbation or phase angle information is exploited. Subsequently, the grid inductance and resistance are derived from power measurement. Alternatively, the active or reactive power information serves to estimate the grid impedance in the power control case. The proposed method features an easy implementation without any harmonic distortion, safety concern, or dependence on control parameters. Moreover, the method operates nonintrusively in most scenarios. Furthermore, a novel Kalman filtering scheme is proposed to provide added incentives. Finally, simulation and experimental results validate the effectiveness and simplicity of the proposed method.