Mathematical Modeling of Thermal Fields in a Fragment of the Lining of a Rotary Kiln

被引：1
|
作者：
Sharikov, Yu. V. [1 ]
Markus, A. A. [1 ]
机构：
[1] Natl Mineral Resources Univ Gornyi, St Petersburg, Russia
来源：
METALLURGIST | 2014年 / 57卷 / 11-12期
关键词：
rotary kiln; lining; mathematical modeling; energy conservation; reduction in heat losses;
D O I：
10.1007/s11015-014-9845-y
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new design of lining for rotary kilns is described and is compared with existing linings. The thermal field of the lining is calculated for both cases by using the software Ansis 14.0 Fluent and AnsinICEM 14.0. A comparison is also made between the thermophysical characteristics of the new lining and existing linings and recommendations are given on the areas of application of the former.
引用
收藏
页码：1062 / 1066
页数：5
相关论文
共 50 条
  • [31] Influence of heating and cooling rate on the stress state of the brick lining in a rotary kiln using finite element simulations
    Ramanenka, D.
    Gustafsson, G.
    Jonsen, P.
    ENGINEERING FAILURE ANALYSIS, 2019, 105 : 98 - 109
  • [32] Chaotic and multifractal characteristic analysis of noise of thermal variables from rotary kiln
    Mingyang Lv
    Xiaogang Zhang
    Hua Chen
    Yicong Zhou
    Jianmin Li
    Nonlinear Dynamics, 2020, 99 : 3089 - 3111
  • [33] Chaotic and multifractal characteristic analysis of noise of thermal variables from rotary kiln
    Lv, Mingyang
    Zhang, Xiaogang
    Chen, Hua
    Zhou, Yicong
    Li, Jianmin
    NONLINEAR DYNAMICS, 2020, 99 (04) : 3089 - 3111
  • [34] Steady state modeling and numerical simulation of the rotary kiln incinerator and afterburner system
    Tomaz, E
    Maciel, R
    COMPUTERS & CHEMICAL ENGINEERING, 1999, 23 : S431 - S434
  • [35] Rotary steerable systems: mathematical modeling and their case study
    Andrade, Caetano P. S.
    Saavedra, J. Luis
    Tunkiel, Andrzej
    Sui, Dan
    JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY, 2021, 11 (06) : 2743 - 2761
  • [36] Rotary steerable systems: mathematical modeling and their case study
    Caetano P. S. Andrade
    J. Luis Saavedra
    Andrzej Tunkiel
    Dan Sui
    Journal of Petroleum Exploration and Production Technology, 2021, 11 : 2743 - 2761
  • [37] Thermal treatment of the fly ash from municipal solid waste incinerator with rotary kiln
    Wey, Ming-Yen
    Liu, Kuang-Yu
    Tsai, Tsung-Hsun
    Chou, Jing-Tong
    JOURNAL OF HAZARDOUS MATERIALS, 2006, 137 (02) : 981 - 989
  • [38] EMPIRICAL AND STATISTICAL MODELING OF HEAT LOSS FROM SURFACE OF A CEMENT ROTARY KILN SYSTEM
    Simsek, Baris
    Simsek, Emir H.
    Altunok, Taner
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2013, 28 (01): : 59 - 66
  • [39] MODELING OF REFRACTORY BRICK FURNITURE IN ROTARY-KILN USING FINITE ELEMENT APPROACH
    Ramanenka, Dmitrij
    Stjernberg, Jesper
    Eriksson, Kjell
    Jonsen, Par
    11TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS; 5TH EUROPEAN CONFERENCE ON COMPUTATIONAL MECHANICS; 6TH EUROPEAN CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS, VOLS II - IV, 2014, : 1199 - 1210
  • [40] Performance analysis of pilot rotary kiln for activated carbon manufacture, using a steady state mathematical model
    Ortiz, OA
    Martínez, ND
    Mengual, CA
    Petkovic, LM
    LATIN AMERICAN APPLIED RESEARCH, 2003, 33 (03) : 295 - 300
12345