Lagrangian simulation and exergy analysis for waste heat recovery from high-temperature particles using countercurrent moving beds

被引：12
作者：
Liang, Xiao [1 ]
Liu, Xiang Jun [1 ]
Xia, Dehong [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Energy & Environm Engn, Beijing 100083, Peoples R China
来源：
APPLIED THERMAL ENGINEERING | 2019年 / 160卷
基金：
国家重点研发计划;
关键词：
Lagrangian simulation; Waste heat recovery; Countercurrent moving bed; Exergy analysis; ENERGY; ADSORPTION; SYSTEM;
D O I：
10.1016/j.applthermaleng.2019.114115
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The gas-solid countercurrent moving bed provides an effective method of waste heat recovery from high-temperature particles. The Lagrangian descriptions of particle and gas energy equation in a countercurrent moving bed are established. Two typical scenarios for waste heat recovery from high-temperature particles are studied. The first scenario is the calculation of the necessary particle cooling time and bed height for different cases, where the value of outlet particle temperature is first set as a required design condition. The second is the investigation of the effects of particle size and gas velocity on the heat recovery process and recovery gas exergy in a moving bed with a fixed bed height. Detailed results regarding the particle cooling behavior, necessary cooling time, particle, and gas temperature distribution in the bed, and the pressure drop of each case are obtained. The corresponding thermal exergy, pressure exergy loss, and net exergy of the recovered gas are analyzed. Suggestions on the design and operation for waste heat recovery from high-temperature particles using countercurrent moving beds are proposed.
引用
收藏
页数：12
相关论文
共 24 条
  • [1] Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters
    Ahamed, J. U.
    Madlool, N. A.
    Saidur, R.
    Shahinuddin, M. I.
    Kamyar, A.
    Masjuki, H. H.
    [J]. ENERGY, 2012, 46 (01) : 664 - 674
  • [2] A loss method for exergy auditing of steam boilers
    Behbahaninia, A.
    Ramezani, S.
    Hejrandoost, M. Lotfi
    [J]. ENERGY, 2017, 140 : 253 - 260
  • [3] Energy and exergy analyses of the Danish industry sector
    Buhler, Fabian
    Tuong-Van Nguyen
    Elmegaard, Brian
    [J]. APPLIED ENERGY, 2016, 184 : 1447 - 1459
  • [4] Heat recovery from moving cooling beds: transient modeling by dynamic simulation
    Caputo, AC
    Pelagagge, PM
    [J]. APPLIED THERMAL ENGINEERING, 1999, 19 (01) : 21 - 35
  • [5] Analysis of heat recovery in gas-solid moving beds using a simulation approach
    Caputo, AC
    Cardarelli, G
    Pelagagge, PM
    [J]. APPLIED THERMAL ENGINEERING, 1996, 16 (01) : 89 - 99
  • [6] Enviro-exergy sustainability analysis of boiler evolution in district energy system
    Compton, M.
    Rezaie, B.
    [J]. ENERGY, 2017, 119 : 257 - 265
  • [7] Dong Hui, 2012, Journal of Northeastern University. Natural Science, V33, P1299
  • [8] Comparison of different gas turbine cycles and advanced exergy analysis of the most effective
    Fallah, M.
    Siyahi, H.
    Ghiasi, R. Akbarpour
    Mahmoudi, S. M. S.
    Yari, M.
    Rosen, M. A.
    [J]. ENERGY, 2016, 116 : 701 - 715
  • [9] Exergy transfer characteristics of gas-solid heat transfer through sinter bed layer in vertical tank
    Feng, Jun-sheng
    Dong, Hui
    Gao, Jian-ye
    Liu, Jing-yu
    Liang, Kai
    [J]. ENERGY, 2016, 111 : 154 - 164
  • [10] Numerical investigation of gas-solid heat transfer process in vertical tank for sinter waste heat recovery
    Feng, Junsheng
    Dong, Hui
    Gao, Jianye
    Li, Hanzhu
    Liu, Jingyu
    [J]. APPLIED THERMAL ENGINEERING, 2016, 107 : 135 - 143
123