Low cost Active Magnetic Bearings for hard disk drive spindle motors

被引：0

作者：

Vuillemin, R ^{[1
]}

Aeschlimann, B ^{[1
]}

Kuemmerle, M ^{[1
]}

Zoethout, J ^{[1
]}

Belfroid, T ^{[1
]}

Bleuler, H ^{[1
]}

Cassat, A ^{[1
]}

Passeraub, P ^{[1
]}

Hediger, S ^{[1
]}

Besse, PA ^{[1
]}

Argondizza, A ^{[1
]}

Tonoli, A ^{[1
]}

Carabelli, S ^{[1
]}

Genta, G ^{[1
]}

Heine, G ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, Swiss Fed Inst Technol, Inst Microtech, CH-1015 Lausanne, Switzerland

来源：

PROCEEDINGS OF THE SIXTH INTERNATIONAL SYMPOSIUM ON MAGNETIC BEARINGS | 1998年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents the design and implementation of a contact free Active Magnetic Bearing (AMB) and a vector controlled permanent magnet synchronous motor-bearing combination in a conventional Hard Disk Drive (HDD). The suspension and drive unit fits into the space formerly occupied by the spindle ball bearings. The controller design has to take into account the dynamics of the disks mounted on the rotor which can cause instability of the AMB due to strong gyroscopic effects and vibration of the disks. Rotational speeds higher than 10.000 rpm have been achieved without stability problems. The fetal power losses of the first prototype magnetically borne motor are in the same order of magnitude as motors with conventional bearings running at this speed.

引用

页码：3 / 9

页数：7

共 50 条

[1] Electromagnetic design for hard disk drive spindle motors with fluid film lubricated bearings
Liu, ZJ
Bi, C
Zhang, QD
Jabbar, MA
Low, TS
IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (05) : 3893 - 3895
[2] Electromagnetic design for hard disk drive spindle motors with fluid film lubricated bearings
Liu, Z.J.
Bi, C.
Zhang, Q.D.
Jabbar, M.A.
Low, T.S.
IEEE Transactions on Magnetics, 1996, 32 (5 pt 1): : 3893 - 3895
[3] Dynamic characteristics of hard disk drive spindle motors - Comparison between ball bearings and hydrodynamic bearings
Ku, CPR
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (02): : 402 - 406
[4] Analysis of iron loss in hard disk drive spindle motors
Liu, ZJ
Bi, C
Low, TS
IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (05) : 4089 - 4091
[5] Analysis of iron loss in hard disk drive spindle motors
Liu, Z.J.
Bi, C.
Low, T-S.
IEEE Transactions on Magnetics, 1997, 33 (5 pt 2): : 4089 - 4091
[6] An Integrated System Modeling and Analysis of Hard Disk Drive Spindle Motors
Feng, Ming
Kenjo, Takashi
Lu, Weiyang
IEEE TRANSACTIONS ON MAGNETICS, 2009, 45 (11) : 5141 - 5147
[7] Analysis of unbalanced-magnetic-pulls in hard disk drive spindle motors using a hybrid method
Chao, B
Liu, ZJ
Low, TS
IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (05) : 4308 - 4310
[8] Disk drive spindle motors and their controls
Jabbar, MA
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 1996, 43 (02) : 276 - 284
[9] Finite element analysis of hydrodynamic bearings of spindle motor in hard disk drive
Fan, Zhonglei
Ni, Jiangming
Lu, Ping
Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 27 (06): : 6 - 8
[10] Frequency Analysis of Hard Disk Drive Spindle System Supported by Hydrodynamic Bearings
Tohma, Shohta
Isogai, Toshiaki
Hirayama, Tomoko
Matsuoka, Takashi
Yokozuka, Katsuhisa
Mori, Shigeyoshi
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2007, 1 (05): : 717 - 725

← 1 2 3 4 5 →