In situ SEM-EBSP observations of recrystallization texture formation in Al-3mass%Mg alloy

被引:2
作者
Kajihara, Katsura
Matsumoto, Kazuhide
Matsumoto, Katsushi
机构
[1] Kobe Steel Ltd, Mat Res Lab, Nishi Ku, Kobe, Hyogo 6512271, Japan
[2] Kobe Steel Ltd, Aluminum & Copper Div, Moka, Tochigi 3214367, Japan
来源
ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY | 2006年 / 519-521卷
关键词
in-situ SEM-EBSP; recrystallization; nucleation; grain growth; Al-Mg alloy;
D O I
10.4028/www.scientific.net/MSF.519-521.1579
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This study presents in situ observations of recrystallization texture formation in Al-3mass%Mg using SEM concurrent with electron back scattering pattern (EBSP) with hot stage. In the present discussion, the emphasis is on the characteristics of the preferred growth or the shrinkage of Cube and other oriented grains. The in-situ observations of recrystallization demonstrate clearly that the nucleation, growth and shrinkage of recrystallized grains occur simultaneously in each orientation in each region. The overall development of recrystallization texture depends on the balance of nucleation/growth and shrinkage/disappearance of each orientation during recrystallization. The preferential growth is determined by the grain boundary mobility between recrystallized grains or the clusters composed of several similar oriented grains, i.e. Cube clusters or S clusters, and neighboring deformed matrix, and the competitive growth with the surrounding grains. On the other hand, the isolated oriented grain and the strain-stored grains tend to shrink and disappear during recrystallization and grain growth.
引用
收藏
页码:1579 / 1584
页数:6
相关论文
共 13 条
  • [1] ANSELMINO E, 2004, P 9 INT C AL ALL, P811
  • [2] Development of roping in an aluminum automotive alloy AA6111
    Baczynski, GJ
    Guzzo, R
    Ball, MD
    Lloyd, DJ
    [J]. ACTA MATERIALIA, 2000, 48 (13) : 3361 - 3376
  • [3] Daaland O, 1996, ACTA MATER, V44, P1389, DOI 10.1016/1359-6454(95)00289-8
  • [4] On the correlation of texture and ridging in AA6016 automotive alloys
    Engler, O
    Brünger, E
    [J]. ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 345 - 350
  • [5] On the influence of orientation pinning on growth selection of recrystallisation
    Engler, O
    [J]. ACTA MATERIALIA, 1998, 46 (05) : 1555 - 1568
  • [6] JENSEN DJ, 1995, ACTA METALL MATER, V43, P4117, DOI 10.1016/0956-7151(95)00111-8
  • [7] KAJIHARA K, 2004, P 106 C JAP I LIGHT, P85
  • [8] Analysis of deformation textures of asymmetrically rolled aluminum sheets
    Kim, KH
    Lee, DN
    [J]. ACTA MATERIALIA, 2001, 49 (13) : 2583 - 2595
  • [9] Preferential growth of Cube-oriented grains in partially annealed and additionally rolled aluminum foils for capacitors
    Kobayashi, M
    Takayama, Y
    Kato, H
    [J]. MATERIALS TRANSACTIONS, 2004, 45 (12) : 3247 - 3255
  • [10] On the role of grain boundary character distribution in grain growth of Al-Mg alloys
    Matsumoto, K
    Shibayanagi, T
    Umakoshi, Y
    [J]. ACTA MATERIALIA, 1997, 45 (02) : 439 - 451