High temperature behavior of Ni-base weld metal - Part I. Ductility and microstructural characterization

被引:120
作者
Ramirez, AJ
Lippold, JC
机构
[1] Brazilian Synchrotron Light Lab, BR-13084971 Campinas, SP, Brazil
[2] Ohio State Univ, Columbus, OH 43221 USA
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 380卷 / 1-2期
关键词
ductility dip cracking; filler metal 52; filler metal 82; Ni-base alloy; strain-to-fracture test; nitrides; carbides;
D O I
10.1016/j.msea.2004.03.074
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The ductility dip cracking resistance of two Ni-base Filler metals, Filler Metal 52 (FM-52) (59%Ni-29%Cr-9%Fe-1%Mn-1%Al) and Filler Metal 82 (FM-82) (72%Ni-20%Cr-1%Fe-3%Mn-3%Nb) was evaluated using the strain-to-fracture (STF) test. The reinterpretation of previously reported STF test results for these filler metals, is discussed, based on detailed microstructural characterization performed using electron microscopy. In Part II of this paper, new insight into the creep-like, grain boundary (GB) sliding mechanism responsible for intergranular cracking in these filler metals is presented. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:259 / 271
页数:13
相关论文
共 17 条
[1]   TEMPERATURE FACTOR PARAMETERS OF SOME TRANSITION-METAL CARBIDES AND NITRIDES BY SINGLE-CRYSTAL X-RAY AND NEUTRON-DIFFRACTION [J].
CHRISTENSEN, AN .
ACTA CHEMICA SCANDINAVICA SERIES A-PHYSICAL AND INORGANIC CHEMISTRY, 1978, 32 (01) :89-90
[2]  
Collins MG, 2004, WELD J, V83, p39S
[3]  
Collins MG, 2003, WELD J, V82, p288S
[4]  
Collins MG, 2003, WELD J, V82, p348S
[5]  
COLLINS MG, 2002, THESIS OHIO STATE U, P240
[6]   Complex heterogeneous precipitation in titanium-niobium microalloyed Al-killed HSLA steels - I. (Ti,Nb)(C,N) particles [J].
Craven, AJ ;
He, K ;
Garvie, LAJ ;
Baker, TN .
ACTA MATERIALIA, 2000, 48 (15) :3857-3868
[7]  
FENG Z, 1993, THESIS OHIO STATE U, P234
[8]   The thermodynamic modeling of multicomponent phase equilibria [J].
Kattner, UR .
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (12) :14-19
[9]   Effects of sensitization treatment on the evolution of Cr carbides in rapidly solidified Ni-base alloy 600 by a CO2 laser beam [J].
Lim, YS ;
Kim, JS ;
Kwon, HS .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 279 (1-2) :192-200
[10]  
Lippold JC, 1992, METAL SCI JOINING, P141